- Description
Details
The AP-S15L 15A Power Conditioner and Distribution Unit features noise filtering for eliminating unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio transmitters or wireless products. EMI filters are also incorporated to reduce noise from Electromagnetic Interference (EMI) generated by items such as electric motors and switching power supplies.
Unstable AC Mains voltage is one of the main reasons for equipment failure. The amount of energy that can be injected into the power system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. The AP-S15L's circuitry is very fast and can suppress unwanted energy within a nanosecond response and sustain the suppression up to 2 milliseconds, thus ensuring virtually trouble free protection. The AP-S15L has incorporated a front panel pull-out dimmable LED tube light to light a rack. The rear of the rack can be illuminated using the optional 16" gooseneck LED lamp connected via an XLR style socket.- Features
Features
- 9 Total Outlets
- 8 Rear Panel Switched Outlets
- 1 Front Panel Unswitched Outlet
- Radio Frequency and Electromagnetic Interference Filtering
- Circuit Breaker Protection @ 15A
- Spike Suppression up to 6000V
- AC Fault Indicator
- Front Mounted Pull-Out LED Light with 2-Position Dimmer
- Rear Mounted XLR Connector for 12VDC LED Lamp (AP-GNL18)
- Specification
Front Panel Type Power Conditioner & Suppressor Load Rating 15A Outlets 1 Unswitched Lights 1 Pull Out LED with Dimmer Switch Activation Switch Rocker Circuit Breaker 15A Resettable Indicators AC Power On, AC Fault Rear Panel AC Outlets 8 Outlets total LED Light Socket XLR Socket to provide 12VDC for optional AL-GNL18 Gooseneck Lamp LED Light Switch Two position (On / Off) AC Mains Power Cord 9' (3m), 14-gauge Technical Data Current Rating 15 amps Operating Voltage 102VAC – 132VAC Min. Spike Clamping Voltage 460VRMS @ 3,000A Max. Spike Clamping Voltage 6000V Max. Spike Clamping Resp. Time 1 nanosecond Spike Clamping Voltage @ 100A 1250Vp for 20μs Maximum Surge Current 6,500A Energy Rating @ 2ms 600 Joules Noise Attenuation EMI/RFI 10dB @ 10kHz / 40dB @ 100kHz / 100dB @ 10MHz Temperature Range 5° – 35°c Humidity Range 5% to 95% R.H. Mechanical Chassis Finish Black Mounting Rack Mount, 1 RU Power Consumption 8 watts Dimensions (H x W x D) 1.75" (44.5 mm) x 19" (482.6 mm) x 5" (12 7mm) Weight 5.5 lbs. (2.49 kg) - Reviews
Write Your Own Review