AC Power Sequencers

The Furman Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system.

The Juice Goose RC-DM1 is an economical and convenient interface between an alarm control panel and a Juice Goose CQ Series power sequencing product or network of products.

Furman's Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully controlled via a Furman SmartSequencer, legacy Furman sequencer, third-party sequencers, via the Internet (with BB-RS232 adaptor and SmartSequencer), and/or control and automation systems.

The Lowell SEQ-8 is a compact low voltage 8-step sequencer combines with low voltage remote power controls and switches to provide time delayed activation and deactivation of AC powered equipment on site or in a remote location.

The Juice Goose CQ 1520-RX combines reliable AC power sequencing with the proven performance of the Juice Goose RX Series surge protection and filtration.

The Middle Atlantic USC-6R six-step sequencer initiates by front panel, momentary contact closure, or remote switch. 1/3/6s interval and 4 start delays allow connecting up to 3 units.

Designed for Commercial A/V Installers, the CN-2400S combines robust control capabilities via SmartSequencing™ Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT® Remote Power and Energy Management Platform (BB-RS232 adaptor required, sold separately).

Updated for easier installation and operation, the Furman ASD-120 2.0 is a compact rack-mount power distribution system for use where AC power must be distributed to multiple circuits and there is no hard-wired, built-in system.

The Atlas Sound ECM-20 Power Distribution Sequencer Raceway was designed to be flexible, incorporating features that allow it to be used in a variety of applications. The sequenced outputs allow equipment to be turned ON or OFF in a particular order.

In addition to Sequencing, the ART PS8-II is also a full-featured power conditioner, fast acting breaker, EMI and RFI filter, all while offering surge and spike protection to protect your system. Ideal for use with tube preamps, powered speakers, large displays, and more.

The Atlas Sound ECM-2063 AC Power Distribution Sequencer Raceway was designed to be flexible, incorporating features that allow it to be used in a variety of applications. The sequenced outputs allow equipment to be turned ON or OFF in a particular order.

The Atlas Sound ECS-3 has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 15A compact 1 RU unit features three sequential timing sections that can be activated via the unit, or remotely. Front panel activation is via a momentary switch, while rear activation is via a momentary contact closure, or by 5-24VDC trigger feed.

The Lowell SEQR-8 8-channel power sequencer's low voltage, 8-step sequencer provides time-delayed activation and deactivation of equipment connected to a remote power control.