- Description
Details
Atlas Sound AP-C15D 15A Power Conditioner and Distribution Unit
The Atlas Sound AP-C15D 15A Power Conditioner and Distribution Unit has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 15A compact 1RU unit AC Mains Voltage can be monitored via the front panel from the precision Digital Volt Meter. To light your rack, the AP-C15D has incorporated a front panel pull-out dimmable LED tube light. The rear of the rack can be illuminated by the optional 16" gooseneck LED lamp connected via an XLR style socket (AP-GNL18).
The AP-C15D features noise filtering for eliminating unwanted Radio Frequency Interference (RFI) that can be introduced into the AC lines by nearby radio transmitters or wireless products. EMI filters are also incorporated to reduce noise from Electromagnetic Interference (EMI) generated by items such as electric motors and switching power supplies. The Abnormal Voltage indicator on the front panel will flash if the AC Mains is between 101VAC and 107VAC or 128VAC and 132VAC. This is to inform you that a surge occurred and may have damaged voltage sensitive equipment. If an extreme voltage swing occurs above 132VAC or below 101VAC, the AP-C15D Extreme Voltage Shutdown (EVS) protection circuit will automatically activate and turn all outlets off until it is manually reset. The AP-C15D offers intelligent power management control, along with noise filtering and spike/surge protection making it the most compact, effective power management protection system on the market today.- Features
Features
- 10 Total outlets
- 8 Rear panel outlets: 6 filtered and switched, 1 filtered, and 1 unswitched
- 2 Front panel, unswitched outlets
- Radio frequency and electromagnetic interference filtering
- Dual clamping spike & surge suppression, DCS circuitry
- Front panel digital AC mains voltmeter
- Abnormal AC line voltage indicator
- Extreme Voltage Shutdown (EVS) below 101V or above 132V AC line
- Circuit breaker protection @ 15A
- Front mounted pull-out LED light with 2-position dimmer
- Rear mounted XLR connector for 12VDC LED lamp (AP-GNL18)
- Specification
Front Panel Outlets 2 Unswitched Lights 1 Pull Out LED with Dimmer Switch Activation Switch Rocker Circuit Breaker 15A Resettable AC Mains Voltmeter Three Digits, Digital Indicators AC Power On, Abnormal Voltage, AC Fault, Breaker Open, Wiring Fault Rear Panel Specifications AC Outlets 8 Outlets total, 6 Filtered, 1 High Power Non-Filtered, 1 Unswitched Connector LED Light Socket XLR Socket to provide 12VDC for optional 18" Gooseneck Lamp LED Light Switch Two position (On / Off) AC Mains Power Cord 9' (3m), 14-gauge Technical Data Current Rating 15 amps Operating Voltage 102VAC – 132VAC High Voltage Surge Protection Trigger at 133VAC, 1ms typically Low Voltage Protection Trigger 101VAC, 1ms typically Voltmeter Accuracy ±1.5VAC Spike Protection Modes DCS (Dual Clamping Suppression) Circuitry on Incoming AC Mains and Each Section Output Min. Spike Clamping Voltage 460VRMS @ 3,000A Max. Spike Clamping Voltage 6000V Max. Spike Clamping Resp. Time 1 nanosecond Spike Clamping Voltage @ 100A 1250Vp for 20μs Maximum Surge Current 6,500A Energy Rating @ 2ms 2000 Joules Noise Attenuation EMI/RFI 10dB @ 10kHz / 40dB @ 100kHz / 100dB @ 10MHz Temperature Range 5° – 35°c Humidity Range 5% to 95% R.H. Type Power Conditioner & Suppressor Load Rating 15A Mechanical Chassis Finish Black Mounting Rack Mount, 1 RU Power Consumption 12 watts Dimensions (H x W x D) 1.75" ( 44.5 mm) x 19" (483 mm) x 8.5" (219.5 mm) Shipping Weight 8.85 lbs (4.014 kg) - Documents
Documents
- Reviews
Write Your Own Review