- Description
Details
The ART PB4x4 PRO Power Distribution System is built on the foundation of the popular 4x4s. They are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the PB4x4 PRO can provide the surge protection you need to keep your rack safe from unwanted disruption.
All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.
By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.- Features
Features
- APF - Advanced Power Filtering
- Power Capacity of 1800 Watts
- Surge & Spike Protection
- EMI & RFI Filtering
- 8 Rear Outlets with Power Adapter Friendly Positioning
- One Front-mounted Unswitched Power Outlet
- Rear Mounted Gooseneck Light Source
- Specification
Power Capacity 1800 Watts Circuit Breaker 15 Amp Power Outlets Eight Rear Outlets Power Switch Front Location - On/Off Power Switch Illumination Yes - In "On" Position Circuit Breaker Front Location Filtering EMI, RFI, Common Mode PassiveDifferential Mode in Series Protection Circuit Surge & Spike Protection Construction All-Steel Chassis Weight 6 lbs (2.72 kg) - Reviews
Write Your Own Review