- Description
Details
The ControlSpace WP22BU-D Dante wall plate is a cost effective multi-I/O wall box. The WP22BU-D features a balanced mic/line XLR input and a balanced XLR line output. Two RCA line-level inputs and a 3.5 mm TRS line-level input complete the available inputs. A 3.5 mm TRS line-level output is also included. The WP22BU-D is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The size of the WP22BU-D and I/O density make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, balanced/unbalanced source selection, and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer.
- Features
Features
- One balanced XLR mic/line input, one stereo (summed to mono) unbalanced input
- One balanced XLR line output and one mono unbalanced 3.5 mm output — or one stereo unbalanced 3.5 mm output
- 802.3af compliant PoE powered to work with any compliant PoE network switch
- Three gain levels are available on the XLR input with +48VDC Phantom power – all adjustable via ControlSpace Designer™ software
- ID indicator allows easy identification of which WP22BU-D is communicating with ControlSpace Designer software
- RCA inputs (mono-summed) and 3.5 mm input (mono-summed) can be selected via software, individually or summed (see Audio Flow diagram)
- Specification
Audio Inputs Input Channels Two (2) analog, balanced (XLR) and unbalanced (RCA and/or 3.5 mm) Connectors One (1) XLR, one (1) RCA pair, one (1) 3.5 mm TRS Phantom Power +48VDC, software selectable (XLR input only) Gain Settings 0 / +25 / +40 dB, software selectable (XLR input only) Input Impedance > 1.8 kΩ at any gain setting Equivalent Input Noise –115 dBu (+45 dB gain) Maximum Input Level +12 dBu @ 0 dB gain Audio Outputs Output Channels Two (2) analog, balanced (XLR) and unbalanced 3.5 mm, with automatic muting on loss of Dante signal Connectors One (1) XLR, one (1) 3.5 mm TRS Output Noise < –90 dBu Maximum Output Level +12 dBu General Digital Conversion 48 kHz / 24-bit System THD < 0.01 % (at any gain, input signal 3 dB below maximum) PoE Class Class 0 802.3af PoE PD compliant Certifications FCC Part 15 Class A, CE (EN 55022 Class A) Operating Temperature 32 °F – 104 °F (0 °C – 40 °C) Dimensions (H x W x D) 2.75" (70 mm) x 3.60" (91 mm) x 1.88" (48 mm) - Documents
Documents
- Reviews
Write Your Own Review