- Description
Details
The Ashly KLR-2000 high-performance power amplifier has been optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 Ohms the KLR-2000 is perfectly suited for a wide range of sound reinforcement. All four KLR amplifiers are optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 Ohm loads and are housed in a uniform, rugged 2RU chassis. Each KLR amplifier uses a switch mode power supply which assures flawless lows, punchy mids and pristine highs. The output topology of the KLR-2000 is Class-AB, while the KLR-3200, 4000, and 5000 are a 2-step Class-H design.
KLRs are quiet with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. They're also versatile, each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo or parallel mono) and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).- Features
Features
- Rated for 2 Ohms operation
- Balanced inputs via 3-pin Euroblock
- Combo XLR/TRS connectors
- Neutrik speakON type output connectors
- Switch-mode power supply with extensive protection circuitry
- On/off limiter switch
- Forced-air cooled (front-in, rear-out)
- Removable dust filters, easy to clean
- Front-mounted attenuators
- Removable amp handles for permanent installation
- Optional locking front panel volume knobs
- Safety/Compliance: cCSAus, CE, FCC, RoHS
- Specification
Power Output Per Channel 8Ω, 20 Hz - 20 kHz, 1% THD 350W 4Ω, 20 Hz - 20 kHz, 1% THD 600W 2Ω, 20 Hz - 20 kHz, 1% THD 1000W Bridged Mono Mode 4Ω, 20 Hz - 20 kHz, 1% THD 2000W Line Current Draw (all channels driven @ 4Ω) Idle 0.99A 1/8th Power Pink Noise 9.7A 1/3 Power Sine Wave 14.9A S/N (20 Hz-20 kHz, unweighted) >108dB Thermal Dissipation (all channels driven @ 4Ω) Idle (BTU/hr) 164 1/8th Power Pink Noise (BTU/hr) 1876 1/3 Power Sine Wave (BTU/hr) 2880 Input Gain Switch 1V, 20dB, 26dB Signal to Noise Ratio (20Hz-20kHz, rated power @ 8Ω unweighted) >108dB Output Circuitry Class AB Frequency Response 1W @ 8Ω 20Hz – 20kHz +0.3dB5Hz – 70kHz Damping Factor – 100Hz @ rated power @8Ω >380 THD 20Hz-20kHz, 10dB below rated output @ 4Ω <0.05% Input Impedance 12 kΩ, balanced HPF 30Hz, 50Hz, Off (12dB/Oct) Amplifier Protection Output Overcurrent, DC Output, Chassis Temperature, Mains Breaker Cooling Variable Speed Fan, Front-to-Rear Air Flow Front Panel Indicators Protection/Clip, Signal, Power Attenuators Per Channel, Front Panel Input Connectors, each channel 3-pin Euroblock, XLR, ¼” TRS Phone Jack Output connectors, each channel Four pin Speakon type Operating Temperature/Humidity Temperature: -10C to +40C / Humidity: 0% to 90% Power Cable Connector 3-prong NEMA 5-15 (5-20 for KLR-5000) Operating Temperature/Humidity Temperature: -10C - +40C / Humidity: 0% - 90% Dimensions (H x W x D) 3.5” (88 mm) x 19" (482 mm) x 16" (407 mm) Weight 26.2 lbs (11.9 kg) Shipping Weight 31 lbs (14 kg) - Documents
Documents
- Reviews
Write Your Own Review