More Views

Ashly Audio Pema 4125 4-Channel Power Amplifier 4 x 125W @ 4 ohms with Protea DSP
Part # pema4125
Model # Pema 4125

The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.

Availability: Usually arrives in 5-9 business days.

Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email [email protected] or call us at 888-256-4112.

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs. Pema is a digital signal processor. In addition to the full Protea suite of DSP settings, we have added four new features to Pemagain sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment and a real-time clock with an event scheduler.

The Pema 4125 features Ashly's energy efficient Class-D amplifier topology with a switching power supplyand is over 80% energy efficient out of the box. Maximize the energy efficiency of your audio system by using the event scheduler to either put the Pema in stand-by mode or turn it off completely.

Features

Features

  • 4 channel amplifier - 125 watts per channel
  • Lo-Z, 25V, 70V, and 100V models available
  • 8-in x 8-out sophisticated matrix mixing
  • 8 built-in mic pre's
  • Gain sharing automatic microphone mixing (Automixer)
  • Automatic feedback suppression
  • Ambient noise compensation
  • Dedicated telephone/PBX input
  • Dual RCA and balanced euroblock inputs
  • Post DSP AUX line level outputs
  • Stereo summed to mono
  • Event scheduling (RTC)
  • Adjustable HP/LP filters
  • Built-in pink/white noise & sine wave generator
  • Extensive signal processing: Full suite of Ashly NE Series DSP
  • Hot-plug DSP placement, 96kHz or 48kHz sample rate
  • 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
  • 15V phantom power
  • Full control using Ashly software over 10/100 baseT Ethernet
  • Easy and intuitive user interface
  • Automatic DHCP network IP configuration
  • Euroblock connectors for preset recall, DC remote level control and data in/out
  • External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
  • Level control via variable DC control voltage
  • Stand-By mode activation via contact closure
  • Multi-level Security
Specification
75W power output per channel (20Hz-20kHz 1% THD)
125W power output per channel (20Hz-20kHz 1% THD)
Low Z Output (Bridge Mode)8Ω: 250W 920Hz–20kHz, 1% THD, All Channels Driven)
Line Current DrawStandby Mode: 190mA
Idle (no signal): 590mA
Typical (1/8 power pink noise)1.70A
Maximum (1/3 power sine wave)3.72A
Thermal Dissipation (all channels driven)Standby Mode: 46.7
Idle (no signal): 123
Input Sensitivity3.2Bbu
Voltage Gain26dB
Damping Factor>250 (8 Ohm load, <1kHz)
Distortion<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz–20kHz)
Channel Separation-80dB (dB from full output, 1kHz)
Signal to Noise>102dB (20Hz–20kHz, Unweighted)
Frequency Response20Hz-20kHz, +/-1dB
Mic/Line Input Impedance4.8K
Mic/Line Maximum Input Level+21dBu
Mic/Line Preamp Gain0, +20dB, +40dB, +60dB
Mic/Line Phantom Power+15V, channel
Summed Mono3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
Channel 1 TEL-PBX3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
Preamp Output Maximum Level+8dBu
AUX Output Maximum Level+20dBu
Balanced Mic/Line Input ConnectorEuroblock 3.5 mm
Unbalanced Summed Mono Input ConnectorDual RCA
Channel 1 TEL-PBX Input ConnectorEuroblock 3.5 mm
Preamp/AUX Output ConnectorEuroblock 3.5 mm
Speaker Output ConnectorEuroblock 7.62 mm
Dimensions (H x W x D)3.50" (89 mm) x 19" (483 mm) x 16.84" (428 mm)
Unit Weight23.5 lbs (10.7 kg)
Shipping Weight30.9 lbs (14 kg)
Documents
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Ashly Audio Pema 4125 4-Channel Power Amplifier 4 x 125W @ 4 ohms with Protea DSP