- Description
Details
The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor. In addition to the full Protea™ suite of DSP settings, we have added four new features to Pema—gain sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment and a real-time clock with an event scheduler.
Pema features Ashly's energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box. Maximize the energy efficiency of your audio system by using the event scheduler to either put the Pema in stand-by mode or turn it off completely.
- Features
Features
- Lo-Z, 25V, 70V, and 100V models available
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic pre's
- Gain sharing automatic microphone mixing (Automixer)
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced euroblock inputs
- Post DSP AUX line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Built-in pink/white noise & sine wave generator
- Extensive signal processing: Full suite of Ashly NE Series DSP
- Hot-plug DSP placement, 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
- 15V phantom power
- Full control using Ashly software over 10/100 baseT Ethernet
- Easy and intuitive user interface
- Automatic DHCP network IP configuration
- Euroblock connectors for preset recall, DC remote level control and data in/out
- External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Specification
Power Output Per Channel 8Ω 20Hz-20kHz 1% THD 75W 4Ω 20Hz-20kHz 1% THD 125W Line Current Draw (120V, all channels driven) Line Current, Standby Mode 290ma Line Current, Idle (no signal) 565ma Line Current, Typical (1/8 power pink noise) 2.78A Line Current, Maximum (1/3 power sine wave) 5.78A Thermal Dissipation (all channels driven) BTU/hr, Standby Mode 63.8 BTU/hr, Idle (no signal) 187 BTU/hr, Typ (1/8 power pink noise) 444 BTU/hr, Max (1/3 power sine wave) 481 General Specifications Input Sensitivity (low Z models) 3.2Bbu Voltage Gain (low Z models) 26dB Damping Factor (8 ohm load, <1kHz) >250 Distortion (SMPTE, typical) <0.5% Distortion (THD-N, typical) 8Ω 10dB below rated power <0.5% (20Hz - 20kHz) Channel Separation (dB from full output, 1kHz) -80dB Signal to Noise (20Hz-20KHz, unweighted) >102dB Frequency Response 20Hz - 20kHz, +/-1dB Mic/Line Input Impedance 4.8K Mic/Line Maximum Input Level +21dBu Mic/Line Preamp Gain 0, +20dB, +40dB, +60dB Mic/Line Phantom Power +15V, channel Summed Mono Input Impedance 3.16K Summed Mono Maximum Input Level +11dBu TEL-PBX Input Impedance 3.9K TEL-PBX Maximum Input Level +21dBu Preamp Output Maximum Level +8dBu AUX Output Maximum Level +20dBu Balanced Mic/Line Input Connector Euroblock 3.5 mm Unbalanced Summed Mono Input Connector Dual RCA Channel 1 TEL-PBX Input Connector Euroblock 3.5 mm Preamp/AUX Output Connector Euroblock 3.5 mm Speaker Output Connector Euroblock 7.62 mm Dimensions (H x W x D) 3.50" (89 mm) x 19" (483 mm) x 16.84" (428 mm) Unit Weight 25 lbs (11.3 kg) Shipping Weight 32.3 lbs (14.7 kg) - Documents
Documents
- Reviews
Write Your Own Review