- Description
Details
The Ashly SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. Switch mode power supplies and Class-D amplifier circuitry provide an extremely power efficient solution. It is convection cooled, so little maintenance is needed after the installation, and no annoying fan noise. Of course you get the reliability, superior sonic quality and rugged construction you’ve come to expect from Ashly.
- Features
Features
- Two-channel, 150W/ch @ 4 ohms
- Convection cooling
- Extremely low noise
- Extensive protection circuitry
- Euroblock inputs and screw terminal outputs
- Safety/Compliance: cTUVus/FCC, CE (pending), RoHS
- Level attenuators for each channel
- Signal present and clip alert status L.E.D.'s
- 2-channel versions have a stereo headphone jack
- Rear panel switches to select between two choices of input sensitivity
- HPF frequencies and normal or bridged mode
- Remote power turn-on/off and adjustable turn-on delay up to eight seconds
- Adjustable turn-on delay up to eight seconds
- Specification
Rated Power 8 Ohms (Stereo) 2 x 80W Rated Power 4 Ohms (Stereo) 2 x 150W Rated Power 8 Ohms (Bridged Mono) 1 x 300W Rated Power 25V (Stereo) 2 x 150W S/N (20 Hz-20 kHz, Unweighted) >105dB 1/8th Output (Pink Noise @ 4 Ohm) 37.5W 1/8th Draw (Pink Noise @ 4 Ohm) 64.0W 1/8th Current (Pink Noise @ 4 Ohm) 1.10A Idle Power (Pink Noise @ 4 Ohm) 20.0W Idle Current (Pink Noise @ 4 Ohm) 0.35A Frequency Response (8 Ohms) 20 Hz - 20k Hz, ± 1.0 dB Input Impedance 20 k ohms, balanced Input Sensitivity 1dBu (75W), 4dBu (150W) Gain 26dBu, 36dBu Maximum Input Level +21dBu Damping Factor (8 Ohms) > 200 Cooling Convection Output Circuitry Class D Connectors (each channel) Input - each channel 3- Pin Euroblock Output - each channel Screw terminals Front Controls AC Power Switch Input Attenuators Front Indicators (LED Color) Power (Blue), Standby (Yellow), Protect (Red), Clip (Red) Signal Present (Green) Rear Controls (4) Delay DIP Switches
(2) 80Hz HPF On/Off Button
(2) Gain Sensitivity Button
(2) Bridge/Stereo Mode SwitchAmplifier and Load Protection Output Overcurent, DC Output, Supply Overvoltage, Chassis Temperature Inrush Limiting Mains Fuse Cordset 3-Prong IEC Dimensions (H x W x D) 1.75" (44.5 mm) x 19" (483 mm) x 11.0" (279.4 mm) Net Weight 8.83 lbs (4 kg) Shipping Weight 15 lbs (7 kg) - Documents
Documents
- Reviews
Write Your Own Review