Audio-Technica ATW-3193b UHF Wireless Headset System

Home /
Audio-Technica ATW-3193b UHF Wireless Headset System (Discontinued)

Description

Details

The ATW-3193b includes the ATW-R3100 receiver, ATW-T310 UniPak® transmitter and BP893cW MicroEarset omnidirectional condenser headworn microphone.

Audio-Technica's third-generation 3000 Series wireless system offers up to 1001 selectable UHF frequencies and new features for clear sound & intuitive operation. We've simplified selection of usable frequencies, increased system reliability, and illuminated transmitter screens for clear reads on dark stages. It all adds up to the luxury of rock-solid, richly detailed high-fidelity sound.

The versatile ATW-T310b UniPak® body-pack transmitter features a secure 4-pin locking connector compatible with a wide range of microphones. A 3-position sliding cover on the transmitter's control panel prevents accidental shut-off or channel-switching. A new locking battery compartment provides a more secure latch and more robust design.

The packaging bundles offer an affordable, easy solution for wireless needs for everything from corporate AV presentations and church/house of worship applications to broadcasting and theater sound reinforcement.

Features

Features

996 - 1001 UHF frequencies in one of two UHF frequency ranges
Available in two frequency bands:

Band C: 541.500 MHZ to 566.375 MHz (TV Channels 25 - 30)
Band I : 482.000 MHz to 507.000 MHz (TV Channels 16 - 20)

Antenna power available for powered antennas & other in-line RF devices
Nine pre-coordinated frequency scan groups simplify selection of usable frequencies in a multi-channel wireless system
True Diversity operation reduces dropouts
Advanced digital Tone Lock™ squelch effectively blocks stray RF and communicates transmitter data for receiver display
Transmitters offer backlit LCD & dual-color LED
Locking battery compartment with secure latch and robust design
Ground-lift switch helps eliminate audible hum caused by ground loops
Balanced and unbalanced audio output jacks
ATW-T310b UniPak® transmitter includes Super Hi-Z input that provides optimum load for guitar pickups

Specification

Overall System
Minimum Frequency Step	25 kHz
Modulation Mode	FM
Maximum Deviation	±35 kHz
Dynamic Range	> 110 dB (A-weighted), typical
Total Harmonic Distortion	< 1% (at 1 kHz, ±17.5 kHz deviation)
Operating Range	100 m (300'), typical
Operating Temperature Range	-5º C to +45º C (23º F to 113º F)
Frequency Response	70 Hz to 15 kHz (+1 dB, -3 dB)
ATW-R3100 Receiver
Receiving System	True diversity
Image Rejection	60 dB nominal, 55 dB minimum
RF Sensitivity	20 dBuV at 60 dB S/N ratio
Maximum Output Level	XLR, balanced: +9 dBV; ¼" (6.3 mm), unbalanced: +7 dBV
Antenna Input	BNC-type, 50 ohms Bias voltage 12V DC, 60 mA, each
Power Requirements	12-18V DC, 500 mA
Dimensions (H x W x D)	1.73" (44 mm) x 8.27" (210 mm) x 6.47" (164.4 mm)
Net Weight	2.4 lbs (1.1 kg)
ATW-T310 Transmitter
RF Power Output	High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions	Following federal and national regulations
Input Connection	Four-pin Locking Connector. Pin 1: GND, Pin 2: INST INPUT Pin 3: MIC INPUT, Pin 4: DC BIAS +5V
Batteries	Two 1.5V AA, not included
Battery Life	High: 6 hours (alkaline); Low: 8 hours (alkaline)
Dimensions (H x W x D)	3.43" (24 mm) x 2.6" (66 mm) x 0.94" (87.0 mm)
BP893c Headworn Microphone
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Omnidirectional
Frequency Response	20-20,000 Hz
Dynamic Range	88 dB, 1 kHz at Max SPL (wired only)
Signal-to-noise Ratio	68 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 2 mA typical (wired only)
Dimensions (L x Dia)	0.32" (8.1 mm) x 0.10" (2.6 mm)
Weight	2.0 g (0.07 oz)

System Includes