- Description
Details
Community's DS8 8" two way surface mount speaker is a low profile, compact enclosure with dynamic sound quality and excellent intelligibility. The subwoofer is available for extended low-frequency enhancement. For larger installations, the 8-inch DS8 provides higher sound pressure levels, higher sensitivity, and greater bass extension. The DS8 also easily outperforms competitive 10-inch format loudspeakers. The DS models are equipped with built-in autoformers, allowing the full loudspeaker output to be realized with low impedance or 70V or 100V distribution lines.
All D SERIES surface mount loudspeakers are elegantly styled with paintable black and white finishes. For durability and improved sonic quality, the cabinets feature thick-wall, internally-reinforced high impact ABS construction with rounded surfaces that greatly reduce the acoustic resonances common in flat-sided cabinets. The easy to install enclosures also feature zinc-rich epoxy dual-layer powder-coated grilles and mounting brackets, stainless steel hardware and an included IP56 wiring cover, making all standard models equally suited for indoor or continuous outdoor direct exposure applications.
With a modern architectural appearance that aesthetically merges well in most environments, combined with weather-resistant capability, high output and HF compression driver intelligibility, the D SERIES surface mount models are ideally suited for use in a wide variety of high-quality speech and music applications.- Features
Features
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
- Infin-A-Ball™ low profile mounting bracket included
- Weather-resistant construction with treated drivers, two-layer powder coated grilles and protected wiring ingress
- Available in standard black or white finishes
- Specification
Operating Range 60 Hz - 22 kHz Frequency Response 70 Hz - 20 kHz (±4.3 dB) Max Input Ratings (8 ohm) 150W continuous, 375W program 35 volts RMS, 77 volts momentary peak Transformer Taps 70V / 100V 120W, 60W, 30W, 15W and low impedance 120W, 60W, 30W Sensitivity (1W/1m) 95 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
96 dB SPL (250 Hz to 4 kHz speech range)Maximum Output 117 dB SPL / 124 dB SPL (peak 8 ohm) Nominal Impedance 8 ohms Minimum Impedance 6.5 ohms @ 220 Hz Nominal Coverage 115º conical (+46° / -46°, 500 Hz to 6 kHz) Axial Q / DI 5.7 / 7.6, 500 Hz to 6 kHz Crossover Frequency 1.3 kHz Recommended Signal Processing 60 Hz, 24 dB/Oct high pass filter Drivers LF 1 x 8-inch cone
HF 1 x 1.25-inch exit compression driverDriver Protection Self-resetting solid state circuit breaker Input Connection 4 screw Euroblock connector for two pair of 2 wire leads concealed in the base of the mounting bracket Controls Front-accessible wattage / low impedance selector switch hidden behind the rotatable logo Enclosure ABS plastic, matte finish, paintable Finish Black or white Mounting/Rigging Provisions Infin-A-Ball mounting system with hidden internal wiring Grille Dual-layer powder coated steel, black or white finish Safety Features Built-in safety cable attachment loop Environmental IP55 rated loudspeakers, IP56 rated connector cover, designed to Mil Spec 810 Required Accessories Electronic high pass filter Supplied Accessories Infin-A-Ball mounting bracket Hex wrench Flathead screwdriver Optional Accessories DS-WMP Wall Mount Plate Dimensions (H x W x D) 18.5" (470 mm) x 9" (230 mm) x 10.1" (257 mm) Weight (without bracket) 17.6 lbs (8 kg) Weight (with bracket) 18.2 lbs (8.3 kg) Shipping Weight (Pairs) 44 lbs (20 kg) - Reviews
Write Your Own Review