- Description
Details
The Community R6-51MAX model features six powerful 1-inch exit HF drivers, six high performance midrange drivers, and six 600W neodymium woofers. The R6-BHMAX also utilizes six high performing 600W neodymium woofers for intense low frequency projection. Both R6-MAX models deliver well behaved coverage patterns, exceptional intelligibility and flat frequency response. While providing the outstanding dynamic range and performance expected from R SERIES, the new R6-MAX offers listeners a superior musical experience with higher output and longer projection than the standard R6.
The R6-51MAX is constructed with premium components in a triamp format to maximally optimize its performance. It uses very high sensitivity 1" HF compression drivers that provide extended HF response and a balanced frequency response with the rest of the system. Operated with a high crossover frequency, the large HF drivers maintain very high headroom, delivering effortless performance. The six high power high excursion LF drivers feature high flux neodymium motors with demodulation rings for extended response and low distortion performance. The midrange high performance M200HP 2" exit compression drivers, achieve higher output while maintaining extremely low distortion.
Tri-amplification provides improved optimization for each driver band and improved vertical directivity consistency. The R6-51MAX is an extremely capable system using an innovative all horn-loaded design of multiple driver vertical line arrays. The resulting output and coverage pattern is ideal for applications requiring high impact, long throw full-range performance.
- Features
Features
- Integral mounting points
- Extended projection
- Pattern control below 100 Hz
- Fiberglass enclosure
- Triamp operation
- Specification
Operating Mode Triamp with DSP Loudspeaker Type 3-Way, Horn Loaded Triaxial, Weather-Resistant Operating Range 44 Hz to 17.5 kHz Nominal Beamwidth (H x V) 50°x 10° Transducers LF 6 x 12" inherently weather-resistant cones with 3" voice coil, neodymium motor and demodulation ring
MF 6 x 2" exit, M200HP compression, 3.5" diaphragm, 2.2" Voice coil, high temp non-metallic diaphragm
HF 6 x 1" exit compression, 1.7" voice coil, demodulation ring, ketone polymer diaphragmContinuous Power Handling @ Nominal Impedance LF 120V: 3600W @ 4 ohms (14400W peak)
MF 85V: 900W @ 8 ohms (3600W peak)
HF 51V: 660W @ 4 ohms (2640W peak)Nominal Sensitivity LF: 107 dB @ 1W, 110 dB @ 2.83V
MF: 112 dB @ 1W, 112 dB @ 2.93V, HF: 115 dB @ 1W, 118 dB @ 2.83VNominal Maximum SPL (Whole Space) LF: 149 dB (Peak), 143 dB (Continuous)
MF: 148 dB (Peak), 142 dB (Continuous)
HF: 150 dB (Peak), 144 dB (Continuous)Equalized Sensitivity System: 108 dB @ 1W, 11 dB @ 2.83V Equalized Maximum SPL System: 150 dB (Peak), 144 dB (Continuous) Recommended Amplifiers LF: 3600W - 7200W @ 4 ohm, (120V - 170V)
Mf: 900W - 1800W @ 8 ohms, (85V - 120V)
HF: 660W - 1320W @ 4 ohms (51V - 73V)Input Connection (3) 16-2 SJOW 12' (3.7 m) Mounting Points (4) 1/2-13 rigging points for third party suspension systems, (10) 5/16” flange holes for supplemental support (not suspension) Environmental IP55 per IEC 60529, conforms with MIL-STD-810G Dimensions (H x W x D) 49" (1245 mm) x 37" (940 mm) x 43.5" (1105 mm) Weight 326 lbs (147.9 kg) Shipping Weight 418 lbs (189.6 kg) - Documents
Documents
- Reviews
Write Your Own Review