- Description
Details
The R6-BASSHORN is a high output, high power low frequency system designed for long throw applications in larger arenas, stadiums, and other large scale facilities requiring high output levels with superb clarity. The R6 will array with effectively increased pattern control and, through mutual coupling, with higher efficiency at lower frequencies.
The R6-BASSHORN has six, high sensitivity 12 inch drivers with powerful, heavy-duty motor structures mounted in a one-piece fiberglass, 42 Hz flare rate horn that is surrounded by a rigid fiberglass weatherproof cap.
The R6-BASSHORN is designed as an optimum low frequency complement to horn-loaded full-range systems (such as the R2) in terms of its output level, pattern control, frequency range and physical dimensions. Proper implementation with a full-range system requires an electronic crossover and alignment signal delay along with appropriate equalization. Community's DSC42 Digital System Controller is ideally suited to provide these functions.
- Features
Features
- All-Weather, all Fiberglass Enclosure
- Horn Loaded
- High Efficiency, High Output
- Six High Powered 12" Drivers
- Excellent Transient Response
- Predictable LF Pattern Control
- High-output, high-power low-frequency system
- Specification
Loudspeaker Type Low Frequency Horn System Operating Range 45 Hz - 500 Hz, 55 Hz - 450 Hz (+/-4 dB) Max Input Ratings 1200W continuous, 3000W program, 80 volts RMS, 178 volts momentary peak Recommended Power Amplifier 2500W to 3600W @ 5.3 Ohms Sensitivity 1W/1m 108 dB SPL (50 Hz - 315 Hz 1/3 octave bands) Maximum Output 139 dB SPL / 146 dB SPL (peak) Nominal Impedance 5.3 Ohms Min Impedance 3.9 Ohms @ 175 Hz Nominal -6 dB Beamwidth 90° H x 60° V @ 315 Hz Axial Q / DI 9.1 / 9.6, 315 Hz Recommended Signal Processing 150 Hz - 300 Hz electronic crossover, 40 Hz high pass filter Drivers (6) 12", Ferrofluid-cooled Input Connection 4 foot (1.2m) SJOW #16 Gauge Enclosure Hand-laminated fiberglass, gray gel-coat Mounting / Rigging Provisions (2) 1/2 - 13 threaded mounting points, (10) 7/16" holes on horn flange Grille 3-layer Weather-Stop™, (Perforated steel, foam, stainless steel mesh) Required Accessories Electronic Crossover Optional Accessories DSC42: Digital System Controller Weight 204 lbs / 92.5 kg Shipping Weight 269 lbs / 122 kg Dimensions (H x W x D) 49 in. / 1245 mm x 37 in. / 940 mm x 43.5 in. / 1105 mm - Reviews
Write Your Own Review