- Description
Details
The WX-218SDF uses a unique combination of techniques to keep voice coil temperatures low to minimize power compression that causes reduced output at higher volume levels. BCL (Balanced Cone Loading) improves the linearity of the system by balancing the front and rear air loads. The 3rd harmonic distortion at 40V (50% power) averages less than 1.9% over its operating range and the enclosure has strong internal bracing to reduce sound energy losses from enclosure vibration.
The WX-218SDF is designed to provide high quality music and voice reproduction in applications requiring extreme weather-resistance. The WX-218SDF enclosure features unmatched durability and ruggedness and is engineered for use in permanent installations. The loudspeaker enclosure and faceplate are constructed of multi-layer glass composite lined with 18mm (7-layer) marine grade plywood, resulting in extreme structural strength. All exposed hardware is stainless steel or powder-coated aluminum extrusion. Four steel weather-resistant dual-layer powder-coated brackets are included for mounting.- Features
Features
- Exceptional punch, high power and low distortion.
- Independent bass ports for efficient output.
- All-weather, multi-layer glass composite shell over 18mm (7-layer) marine grade plywood interior.
- Dual-layer powder-coated stainless steel mounting brackets included.
- Stainless steel hardware.
- Specification
Loudspeaker Type Subwoofer (Down-fire), weather-resistant Operating Range 35 Hz - 500 Hz (-10 dB) Frequency Response 47 Hz - 450 Hz (-3 dB) Coverage Pattern 360° H x 180° V Max Input Ratings 1400W RMS, 2800W Program, 4 ohms74.8 volts RMS, 149.7 volts momentary peak Maximum Output 134 dB SPL / 140 dB SPL (peak) Sensitivity (1W/1m) 103 dB (50 Hz-315 Hz) half space Nominal Impedance 4 ohms, 3.3 ohms @ 40 Hz minimum Recommended High Pass 35 Hz 12 dB / Octave Drivers LF 2 x 18" cast frame, vented pole, weather-treated Driver Protection None Required Accessories DSP Signal processor Input Connection:(through the grille face) 3' (.914 m) SJOW #10-2 gauge cable with stripped ends Enclosure Trapezoidal fiberglass outer shell & face lined & reinforced with 18mm (7layer) marine grade plywood Finish Black or White gel coat fiberglass Grille 3-Layer Weather-Stop™ backing, 304SS zinc-rich dual-layer powder-coated Environmental Specifications IP56 per IEC 529 Dimensions – H x W x D: (Height includes brackets) 30.76" (781 mm) x 49.80" (1265 mm) x 24.32"(618 mm) Unit Weight 196 lbs (88.9 kg) (with mounting brackets) - Documents
Documents
- Reviews
Write Your Own Review