- Description
Details
Ease-of-installation is the driving principle behind QSC’s next generation of small format, surface mount loudspeakers. Innovations found on AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system.
Housed in rugged ABS enclosures for long-term durability, S10T loudspeakers employ DMT™ (Directivity Matched Transition) which matches the LF and HF coverage at the crossover point. This ensures even coverage across the listening plane for smooth, coherent audio reproduction. The 1.4in diaphragm, 1-in exit compression driver on the S10T delivers crisp, detailed high-frequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. To further enhance performance, tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC amplifiers. Moreover, the low saturation transformers offer premium performance on 70/100V distributed audio lines.
Installers will appreciate flexible mounting options. Euroblock connectors allow pre-wiring of the system and the included
X-Mount hardware enables the installer to mount the bracket and then simply lift the loudspeaker onto the mount and lock it into place. Moreover, the loudspeaker can attach to its mount on any plane to facilitate multiple deployment configurations.
AD-S loudspeakers can easily be mounted to any weight bearing, flat surface. Knurled surfaces on the mount’s pivot points ensure that the loudspeaker deployment angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle. S10T models also feature M10 installation points for suspending the loudspeaker via eye-bolts as well as mounting points for an optional yoke bracket.- Features
Features
- DMT (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area.
- Patent pending X-Mount enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time.
- Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options.
- Euroblock connectors allows pre-wiring of the system.
- Low saturation 70/100V transformers with 8 ohm bypass.
- Lightweight ABS enclosures offer long-term durability and lasting good looks.
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance.
- Meets IEC60529 IP-54 for dust and splash resistance.
- Available in black (RAL 9011) or white (RAL 9010).
- Complete EASE, CAD & BIM information available online.
- Specification
Effective frequency range 50 – 19k Hz Rated noise power / voltage 250 watts / 45 volts (rms) Broad-band sensitivity 92 dB SPL Coverage angle (-6 dB) 90° Directivity factor (Q) 7 Directivity Index 10 dB Maximum continuous SPL 116 dB Maximum peak SPL 122 dB Rated impedance 8 ohms Recommended amplifier power 500 watts Transformer taps 70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass; 100V: 100, 50, 25 and 8 ohm bypass HF transducer /LF transducer 1” exit/1.4” voice-coil compression driver;10” weather resistant woofer;2.5”/64 mm voice-coil Input connector type Euroblock connector with parallel output terminals Enclosure material Painted ABS polymer Grille material Powder coated aluminum Ingress protection IP-54 Operating environment Designed for indoor and outdoor use Operating Temperature Range -20 to 50 °C / -4 to 122 °F Net weight 31 lbs / 15 kg Product dimensions 20.3” x 12.5” x 11.7” (516 x 318 x 298mm) Shipping dimensions 31.7” x 16.1” X 16.1” (805 x 409 x 409mm) Shipping weight 40.6 lbs(18.45 kg) - Reviews
Write Your Own Review