- Description
Details
Based on an all-new evolution of Tannoy's proprietary Dual Concentric point-source driver, the CMS 403DCe has been fundamentally re-engineered to deliver wider and more consistent broadband directivity, even greater intelligibility, and a more accurate and linear response.
The new Dual Concentric driver design features revolutionary Omnimagnet™ technology and unique patent-pending Torus Ogive Waveguide™ device, together providing more consistent and controlled directivity along with improved high frequency response. Improved time-alignment and greater coherence between LF and HF results in a wider sweet spot for enhanced performance both on and off-axis.
The CMS 403DCe also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents inadvertent over-screwing. Specifically designed for fast, simple and cost effective installation in new and existing buildings, the CMS 403DCe can be entirely angled towards the listener within the fixed ceiling-mounting ring. By discreetly pivoting the loudspeaker towards the desired area of coverage, the problems of difficult speaker placement - particularly in less than perfect room configurations – are easily overcome.
The CMS 403DCe utilizes a 16 ohm driver, making it ideal for use in high performance lowimpedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers). A low-insertion loss 30 W transformer is included, with convenient front switching for taps at 30 W, 15 W and 7.5 W, with an additional 3.75 W tap for traditional constant voltage systems.
The CMS 403DCe is supplied with an integral back-can, ready to install as a single unit. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. All models are supplied with two tile support rails and one C-ring; a plaster (mud) ring is available as an optional accessory.
- Features
Features
- Full range ceiling loudspeaker for installation applications
- 40 Watts continuous, 160 Watts peak power
- Next generation 4" Dual Concentric point source driver featuring Omnimagnet technology
- Torus Ogive waveguide for improved high-frequency response and directivity
- Blind Mount enclosure supplied with integral molded ABS back can
- Integrated single unit construction for ease of installation
- Adjustable tilt angle with 360° rotation to accommodate difficult loudspeaker placements
- Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
- Low insertion loss 30 W line transformer with easily accessible tapping switch
- Optimized for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
- Semi-matte white finish fits unobtrusively in any environment
- Powder coated UV resistant perforated steel mesh grille with dust protection
- Removable grille for custom painting
- Self-aligning 3 way clamp mounting system
- Mounting C-ring and ceiling tile rails included
- 10-Year Warranty Program
- Designed and engineered in the U.K.
- Specification
System Frequency Response (-3dB) BM Backcan 110 Hz - 50 kHz Frequency Range (-10dB) BM Backcan 80 Hz - 54 kHz System Sensitivity (1W @1m) 88 dB (1 W = 4 V for 16 Ohms) Nominal Coverage Angle 90 degrees conical Power Handling Average: 60W, Program: 120W, Peak: 240W Recommended Amplifier Power 120 W @ 16 ohms Nominal Impedance (Lo,Z) 16 Ohms Rated Maximum SPL Average: 107 dBPeak: 113 dB Transformer Taps (via front rotary switch) 70V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation Dual Concentric point source driver 1 x 100 mm (4") Dual Concentric driver, using Omnimagnet technology Low Frequency 35 mm (1.38") voice coil, treated multi fiber paper pulp cone High Frequency 20 mm (0.79") PEI dome Enclosure Backcan: Reflex loaded UL 94V-0 rated ABS Enclosure Baffle: Reflex loaded UL 94V-0 rated ABS Enclosure Grille: Steel, with weather resistant coating Safety Features Safety ring located at rear of enclosure for load bearing safety bond Clamping Design Security toggle clamp Blind Mount (BM) Complete with fixed backcan Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm Conduit Knockouts on PI Backcan 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10") Connectors Removable locking connector with screw terminals with "loop through" facility Included Accessories C Ring, Tile bridge, Paint mask, Cutout template, Grille, Plaster (Mud) ring Dimensions Bezel Diameter 8.07" (205 mm) Front of Ceiling to Rear of Pod 5.81" (147.6 mm) Hole Cutout Diameter 7.36" (187 mm) Weight Weight (Pair) 12.12 lbs (5.50 kg) Shipping Weight (Pair) 17.64 lbs (8 kg) - Documents
Documents
- Reviews
Write Your Own Review