- Description
Details
The Tannoy CMS 603ICT BM is a wide bandwidth, high power-handling and high sensitivity loudspeaker built around CMS 3.0 – the third generation of Tannoy's revolutionary Ceiling Monitor System technology. Incorporating a newly refined version of Tannoy's proprietary ICT™ point-source driver, the CMS 603ICT BM has been re-engineered for optimum compatibility with Lab.gruppen commercial amplifiers while also delivering consistent broadband directivity, precise articulation for voice and music, and exceptional long-term reliability.
The point source configuration of the Tannoy ICT driver's mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage, avoiding significant energy losses in the vertical plane at the crossover frequency, a flaw inherent in typical two-way designs. The ICT (Inductive Coupling Technology) drive unit also addresses two common component failures in background music systems: the tweeter and the crossover. Use of wireless electromagnetic coupling to drive the tweeter means that no crossover is required, making the ICT drive unit exceptionally reliable and ideal for applications where constant heavy usage is the norm. The mineral-loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.
The CMS 603ICT BM utilizes a 16 ohm driver, making it ideal for use in high performance low impedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers). The low-insertion loss 60 W transformer features convenient front bezel switching for taps at 60 W, 30 W and 15 W, with an additional 7.5 W tap for traditional constant voltage systems. The CMS 603ICT BM also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents inadvertent over-screwing. Magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes with grilles now available as either traditional style (inset in bezel) or new Arco™ style, which conceals the entire unit for architect-friendly aesthetic appeal.
The CMS 603ICT BM is supplied with an integral zinc plated steel back-can, ready to install as a single unit and feature an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. Strain relief is provided by a clamping mechanism for use with plenum-rated cable or conduit, while new spring-loaded and self-aligning clamps make for even quicker and easier installation. All models are supplied with classic grille, two tile support rails and one C-ring; Arco grille and plaster (mud) ring are available as optional accessories.- Features
Features
- Full range ceiling loudspeaker for installation applications
- 60 Watts continuous, 240 Watts peak power
- 6" ICT (Inductive Coupling Technology) point source driver for an extended frequency range
- Blind Mount version supplied with acoustically enhanced zinc plated steel back can
- Integrated single unit construction for ease of installation
- High durability design for constant heavy usage in demanding applications
- UL 1480 certified for general signaling systems
- UL 2043 certified for air-handling spaces
- Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
- Low insertion loss 60 W line transformer with easily accessible tapping switch
- Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
- Semi-matte white finish fits unobtrusively in any environment
- Powder coated UV resistant perforated steel mesh grille with dust protection
- Removable magnetic grille for custom painting
- Optional ARCO designer grilles available for minimal architectural impact
- Self-aligning 4 way clamp mounting system
- Mounting C-ring and ceiling tile rails included
- 10-Year Warranty Program
- Designed and engineered in the U.K.
- Specification
Performance Frequency Response (-3 dB) 78 Hz - 22 kHz Frequency Range (-10 dB) 51 Hz - 24 kHz System Sensitivity (1W @ 1m) 91 dB (1 W = 4 V for 16 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 105 degrees Power Handling Average: 60W
Programme: 120W
Peak: 240WRecommended Amplifier Power 120W @ 16 ohms Nominal Impedance (Lo, Z) 16 ohms Rated Maximum SPL Average: 109 dB
Peak: 115 dBTransformer Taps (via front rotary switch) 70V: 60W (83Ω)/30W (165Ω)/15W (330Ω)/7.5W (660Ω)/OFF & low impedance operation
100V: 60W (83Ω)/30W (330Ω)/15W (660Ω)/OFF & low impedance operationTransducers Low Frequency 165 mm (6.50") mineral loaded polypropylene High Frequency ICT aluminium dome Physical Enclosure Backcan: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coatingSafety Features Safety ring located at rear of enclosure for load bearing safety bond Clamping Design Security toggle clamp. Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36")
Recommended clamp torque: 1.5 NmBackcan Options Complete with fixed backcan Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm Connectors Removable locking connector with screw terminals with "loop through" facility Compliance UL-1480, UL-2043, CE Dimensions Bezel Diameter 10.79" (274 mm) Front of Ceiling to Rear of Backcan 10.10" (256.5 mm) Front of Ceiling to Top of Safety Loop 10.78" (273.8 mm) Net Weight (ea) 11.93 lbs (5.41 kg) - Documents
Documents
- In The Box
In The Box
- C Rings
- Tile Bridges
- Paint Mask
- Cutout Template
- Grilles
- Reviews
Write Your Own Review