Model | WIR TX75-S |
---|
Product Type | Slave emitter |
---|
Sleep/Power Save Mode | Shuts off carrier when no audio is present for 3 minutes |
---|
Modulation | FM Wideband, ±50kHz deviation max, 50 μS pre-emphasis |
---|
Carrier Frequencies | 2.3MHz (Ch1) and 2.8MHz (Ch2). Default at power on = carriers off. |
---|
Emitter IR Power | 0.7 W |
---|
Slave Coverage Area | 5,000 sq. ft in single-channel mode with the RX22-4 receiver (464 sq. m) |
---|
Slave Coverage Area | 3,000 sq. ft in single-channel mode with the RX15-2 receiver (279 sq. m) |
---|
Slave Coverage Area | 2,000 sq. ft in single-channel mode with the RX18 receiver (186 sq. m) |
---|
Master + Slave Coverage Area (minimum, 1-ch mode) | 10,000 sq. ft in single channel mode with the RX22-4, a master and (1) slave transmitter (929 sq. m) |
---|
Master + Slave Coverage Area (minimum, 1-ch mode) | 15,000 sq. ft in single channel mode with the RX22-4, a master, (2) slave transmitters (1,393 sq. m) |
---|
Indicators On/Off | 2-position switch turns on/off indicator lights |
---|
Signal-to-Noise Ratio | 70 dB, (line input) |
---|
Frequency Response | 95Hz to 17.6kHz, -3dB re 1kHz (line input),125Hz to 17.0kHz, -3dB re 1kHz (microphone input) |
---|
Total Harmonic Distortion | <1% (1 kHz, nominal deviation, line or microphone input) |
---|
Slave Extension Cable | CAT-5e (or better) cable, maximum 100’ length, with RJ-45 8P8C male connector on each end, TIA568B |
---|
Slave Status Indicators (on “to slave” jacks) | Green: Power/Unit Status,Yellow: Transmit/Cable Status |
---|
Operating Requirements | 0-50° C (32°-122°F) |
---|
Mounting Kit | Wall or Ceiling mount: BKT 024 Omnidirectional mount,Optional: slave linking bar (MLB 003) |
---|
Approvals | CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme |
---|
Compatible Receivers | WIR RX22-4, WIR RX18, WIR RX15-2 |
---|
Dimensions | 10.0” W (25.4 cm) x 3.1” D (7.9 cm) x 1.5” H (3.8 cm) w/o faceplate or 2.5” H (6.4 cm) w/faceplate |
---|
Weight | 0.6 lbs (0.3kg) |
---|