- Description
Details
The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled
microphone gain allows adjustment of microphone gain per channel.
The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable.- Features
Features
- 12 Inputs / 6 Outputs
- 6 Balanced Mic/Line Inputs
- 4 Unbalanced, Mono-Summed RCA Input Pairs
- S/PDIF Input
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
- Specification
Front Panel LED Indicators Network Traffic, Power Analog Inputs Specifications Number of Inputs 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input Type Euroblock (Mic/Line), RCA (Source) Impedance (Euroblock) >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered Impedance (RCA) >25kΩ Unbalanced, RF Filtered Max. Input Line Level +20dBu Mic/Line, +12dBu RCA CMRR > 40dB, typically >55db @ 1kHz Mic Pre Gain 30 to 60dB Mic Input Noise (E.I.N.) < -118dBu, 22Hz-22kHz, 150Ω Source Impedance Mic Phantom Power +15VDC Analog Outputs Specifications Number of Outputs 6 Total Type Electronically Balanced, RF Filtered Euroblock Impedance 120Ω Balanced, 60Ω Unbalanced Max. Output Level +20dBu A/D Performance Specifications Type dbx Type IV™ Conversion System Max. Output Level +20dBu Dynamic Range line >113dB, A-weighted, >110dB unweighted Type IV dynamic range >119dB, A-weighted, 22kHz BW: >117dB, unweighted, 22kHz BW Sample Rate 48kHz D/A Performance (Dynamic Range) 112dB A-weighted, 109dB unweighted, 22kHz BW System Performance Specifications Dynamic Range >110dB A-weighted, >107dB unweighted, 22kHz BW THD+N 0.003% typical at +4dBu, 1kHz, 0dB gain Frequency Response 20Hz – 20kHz, +/- 0.5dB Interchannel Crosstalk >80dB typical Crosstalk input to output >80dB Propagation Delay 0.8 msec Power Requirement Specifications Operating Voltage 100-240 VAC, 50/60Hz Power Consumption 27 Watts BTU <92.13 Dimensions (H x W x D) 1.75" (45 mm) x 7.75" (197 mm) x 19" (483 mm) Weight 6.2 lbs (2.81 kg) Shipping Weight 8.35 lbs (3.78 kg) - Reviews
Write Your Own Review