- Description
Details
The superior audio quality of this feature packed unit offers installers and contractors a competitively priced, yet highly versatile solution for flexible system configuration and optimising the performance of Tannoy loudspeaker systems.
The TDX1 combines the functions of multiple conventional products in a compact 1U of rack space. For ease of use, presets for the most common configurations of the Tannoy product ranges are preloaded into the TDX1. A further 100 user presets are provided allowing other custom configurations to be programmed.
Set up of the TDX1 is exceptionally simple thanks to the intuitive signal flow based interface. Each input has gain control and 4 bands of parametric EQ with band 1 and 4 offering settings for LF and HF shelving response. The unique routing engine will allow any input to be sent to any output. Butterworth, Bessel and Linkwitz Riley type filters are available on all outputs, which can be configured as 2, 3 or 4-way crossovers.
All output channels feature an independent speaker alignment delay (200 ms per channel) and a 4 band parametric EQ for speaker management. Four high-performance limiters offer a wide range of control over Attack, Release and Threshold parameters.
The two Input and four output connections are via balanced XLR sockets. A SPDIF digital input (44.1 or 48kHz) is also provided, allowing the signal to be kept in the digital domain.
Programme settings are clearly displayed on the 2 x 16 character backlit LCD. The function buttons and input level meters are also backlit, therefore allowing ease of use even in subdued lighting conditions.- Features
Features
- Two balanced XLR analogue inputs, a digital input at 44.1 or 48kHz, and four balanced XLR analogue outputs
- Intuitive front panel mounted signal flow based user interface for simple configuration
- Each input has gain control and 4 bands of parametric EQ. Band 1 & 4 can be set for LF & HF shelving response
- Routing section – The signals present on inputs A & B can be routed to any of the four output channels
- Variable high and low pass filters for each output can be set with a choice of classic filters. Independent control over high pass and low pass functions allow asymmetric crossover functions to be used
- Independent control over high pass and low pass functions allow asymmetric crossover functions to be used
- Four band parametric EQ on each input
- Four band parametric EQ on each output for speaker management
- Independent delay on all outputs (up to 200ms per channel)
- Four high performance limiters, featuring a wide range of control over Attack, Release & Threshold parameters
- Output Gain adjustment
- Presets pre-loaded with all common combinations of Tannoy products to ease the installation and facilitate a hassle free system commissioning process
- An additional 100 ‘user presets’ are available for profiling to suit other loudspeaker combinations which may be required for specific applications
- Specification
Analog Inputs Connectors XLR Impedance, Bal / Unbal 21 kOhm / 13 kOhm Max. / Min. Input Level @ 0 dBFS 24 dBu / 0 dBu Sensitivity Range @ 12 dB headroom -12 dBu to 12 dBu A to D Conversion 24 bit, 128 x oversampling bitstream A to D Delay 0.70 ms / 0.65 ms @ 44.1 kHz / 48 kHz Dynamic Range typ < -110 dB, 22 Hz to 22 kHz THD typ < -110 dB @ 1 kHz, -1 dBFS Frequency Response 0/-0.1 dB, 20 Hz to 20 kHz Crosstalk typ < -100 dB, 20 Hz to 20 kHz Analog Outputs Connectors XLR Impedance Bal / Unbal 40 Ohm / 20 Ohm Max. Output Level 14 dBu D to A Conversion 24 bit, 128 x oversampling bitstream D to A Delay 0.68 ms / 0.63 ms @ 44.1 kHz / 48 kHz Dynamic Range typ < -110 dB typ, 22 Hz to 22 kHz THD typ < -110 dB (0.0014 %) @ 1 kHz, 13 dBu Frequency Response 0/-0.5 dB, 20 Hz to 20 kHz Crosstalk typ < -100 dB, 20 Hz to 20 kHz EMC Complies with: EN 55103-1 and EN 55103-2 Safety Certified to FCC part 15, Class B, CISPR 22, Class B IEC 65, EN 60065, UL6500 and CSA E60065, CSA FILE #LR108093 Environment Operating Temperature 32° F to 122° F (0° C to 50° C) Storage Temperature -22° F to 167° F (-30° C to 70° C) Humidity Max. 90 % non-condensing Finish Anodized aluminum front, plated and painted steel chassis Display 2 x 16 character green LCD Mains Voltage 100 to 240 VAC, 50 to 60 Hz (auto-select) Power Consumption <15 W Dimensions (H x W x D) 1.75" (44 mm) x 19" (483 mm) x 8" (105.6 mm) Weight 3.3 lbs (1.5 kg) - Documents
Documents
- Reviews
Write Your Own Review