- Description
Details
The ENT206 is an all-weather, column array loudspeaker housed in an attractive, heavy duty extruded PVC enclosure. Double the height of the smaller ENT203, the ENT206 provides directional control at significantly lower frequencies than the ENT203, along with enough power to effectively cover much larger areas while still remaining unobtrusive. Ideally suited to applications such as music and speech reinforcement for reverberant houses of worship, hotel lobbies, assembly rooms, transit stations, indoor/outdoor swimming pools, outdoor smoking areas, bowling alleys, and much more, the ENT206 is a solid performer that belies its small size. Like the ENT203, the ENT206 also can be utilized to support larger systems for delay and area fill. The ENT206 employs six high-power LF cone drivers and two Community CRE (Compact Ribbon Emulator) HF tweeter arrays in a two-way, single-amped configuration.
It is available in standard black or white finishes, include selectable low impedance or 70/100-volt operation, a rugged pan-tilt mounting bracket and a permanently mounted safety eyebolt. The paintable enclosures share a 4-5/8-inch wide by 7-1/2-inch deep “teardrop” footprint.- Features
Features
- Advanced passive crossover technology
- Dynamic protection circuitry
- Compact Ribbon Emulator high frequency technology for narrow, well-behaved vertical directivity control
- All-weather construction for indoor/outdoor usage
- Selectable low impedance or 70V/100V operation
- Simple installation using the included pan-tilt mounting bracket
- Tightly controlled vertical dispersion reduces harmful room reflections
- Wide horizontal dispersion means fewer units cover a given area
- Clean, clear and powerful sonic output without the cost of bi-amplification
- Available in standard black or white finishes, may also be painted to match room décor
- Specification
Operating Range 180 Hz to 20 kHz (-3 dB) Frequency Response 120 Hz to 22 kHz (-10 dB) Max Input Ratings (8 ohm) 150W continuous, 375W program, 35 volts RMS, 69 volts momentary peak Autoformer Taps 70V: 60W, 30W, 15W, 7.5W, 3.75W
100V: 60W, 30W, 15W, 7.5WSensitivity (1W/1m) 93dB (180 Hz - 20 kHz) Maximum Output 115 dB SPL / 121 dB SPL (peak) Nominal Impedance 8 ohms Minimum Impedance 8.1 ohms @ 12500 Hz Vertical Coverage 20° (2 kHz to 16 kHz ±10°) @ 13m Horizontal Coverage 140° average (1 kHz - 10 kHz ±20°) Crossover Frequency 5000 Hz Recommended Signal Processing 120 Hz, 24 dB/Oct high pass filter Drivers LF 6 x 80mm long excursion mylar driver
HF 2 x 3-element Compact Ribbon EmulatorDriver Protection Dynamic protection circuitry Enclosure Extruded, high gloss paintable PVC Finish Black or white Grille Dual-layer powder coated steel, black or white finish Dimensions (H x W x D) 19.9" (506 mm) x 4.62" (117 mm) x 7.47" (189 mm) Weight (without bracket) 15 lbs (6.8 kg) Shipping Weight 17.3 lbs (7.8 kg) - Documents
Documents
- Reviews
Write Your Own Review