- Description
Details
The ENT212 is an all-weather column line array housed in an attractive, heavy duty extruded PVC enclosure. Twice the height of the ENT206, the ENT212 provides vertical directional control at far lower frequencies than the ENT206, plus enough power to cover medium-sized venues as the primary system. The ENT212 excels in noisy environments - gymnasiums and other athletic venues are just two of many examples - while its high-fidelity response makes it suitable for more subtle applications such as scholastic auditoriums, houses of worship, jazz and folk music clubs, corporate AV presentations, and much more. The excellent vertical directivity conquers large, reverberant spaces, providing excellent intelligibility and musicality. With the addition of subwoofers, an ENT212 system is capable of meeting a vast range of requirements, from the soccer stadium to the performing arts center. The ENT212 employs twelve high-power LF cone drivers and four Community CRE (Compact Ribbon Emulator) HF tweeter arrays in a single-amped configuration that employs a 4-way frequency shaded crossover.
All ENTASYS 200 models are available in standard black or white finishes, include selectable low impedance or 70/100-volt operation, a rugged pan-tilt mounting bracket and a permanently mounted safety eyebolt. The paintable enclosures share a 4-5/8-inch wide by 7-1/2-inch deep “teardrop” footprint.- Features
Features
- Advanced passive crossover technology
- Dynamic protection circuitry
- Compact Ribbon Emulator high frequency technology for narrow, well-behaved vertical directivity control
- All-weather construction for indoor/outdoor usage
- Selectable low impedance or 70V/100V operation
- Simple installation using the included pan-tilt mounting bracket
- Tightly controlled vertical dispersion reduces harmful room reflections
- Wide horizontal dispersion means fewer units cover a given area
- Clean, clear and powerful sonic output without the cost of bi-amplification
- Available in standard black or white finishes, may also be painted to match room décor
- Specification
Operating Range 100 Hz to 22 kHz (-10 dB) Frequency Response 160 Hz to 20 kHz (-3 dB) Max Input Ratings (8 ohm) 325W continuous, 800W program
51 volts RMS, 102 volts momentary peakAutoformer Taps 70V: 120W, 60W, 30W, 15W, 7.5W
100V: 120W, 60W, 30W, 15WSensitivity (1W/1m) 96 dB (160 Hz - 20 kHz) full space Maximum Output 121 dB SPL / 127 dB SPL (peak) Nominal Impedance 8 ohms Minimum Impedance 8.5 ohms @ 400 Hz Vertical Coverage 15° (2 kHz - 16 kHz ±15°) @ 13m Horizontal Coverage 140° average (1 kHz - 10 kHz ±20°) Crossover Frequency 5000 Hz Recommended Signal Processing 100 Hz, 24 dB/Oct high pass filter Drivers LF 12 x 80 mm long excursion mylar driver
HF 4 x 3-element Compact Ribbon EmulatorDriver Protection Dynamic protection circuitry Input Connection NL4 Speakon-type connector for low impedance operation; and 8-position terminal strip for low impedance or constant voltage operation Enclosure Extruded, high gloss paintable PVC Finish Black or white Grille Dual-layer powder coated steel, black or white finish Dimensions (H x W x D) 39.1" (993 mm) x 4.62" (117 mm) x 7.47" (189 mm) Weight (without bracket) 28 lbs (12.7 kg) Shipping Weight 45 lbs ( 20.4 kg) - Documents
Documents
- Reviews
Write Your Own Review