- Description
Details
The Atlas Sound FAPSU-1 consists of a highly efficient 8", 8 ohm subwoofer designed and built by Atlas Sound to work optimality in the FAPSUB-1 enclosure system. A highly efficient, 3-pole filtering network eliminates unwanted high frequencies from the woofer, while the 937 cubic inch, tuned and ported, deep drawn steel enclosure provides bass responsedown to 45 Hz (±10 dB).
A special low saturation 70.7 V / 100 V transformer is included with 1.9, 3.8, 7.5, 15, 30 and 60 W primary taps (@ 70.7 V) to match and balance the subwoofer with full range speakers without the need for separate amplification. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling.This tap selector switch also includes a transformer bypass setting for 8 ohm direct coupled applications.- Features
Features
- Attractive grille and bezel matches aesthetics of other Atlas Sound FAP Series
- Detachable, Phoenix style, locking, four-pole connector provides for easy daisy chain wiring
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (included)
- Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
- High efficiency, passive crossover network eliminates the need for dedicated amplifier and/or active crossover
- Low crossover point greatly reduces localization (ability of listener to identify the subwoofer location)
- Uniquely designed, "easy access" input panel design allows for "thru" conduit runs using flexible or rigid conduit
- Specification
Frequency Response 45 Hz to 120 Hz (±10 dB) Power Taps 1.9, 3.8, 7.5, 15, 30 and 60 W, 8 Ohm Speaker Type In Ceiling Sub Dispersion Omni Sensitivity 89 dB Average UL Listed/Standard 1480 Woofer Size: 8" (203 mm) Woofer Impedance: 8 Ω Direct Coupled (Nominal) Transformer Taps at 70.7 V: 1.9, 3.8, 7.5, 15, 30, & 60 W & 8 Ω Bypass Power Handling: 100 W RMS Low Pass Filter: Three Pole Design 18 dB / octave @ 120 Hz Magnet Weight: Nominal, 20 oz (580 g) VC Diameter: 35.5 mm VC Material: Copper VC Former Material: Kapton Cut-out Diameter: 14" (35.5 cm) Dimensions (Diameter x D) 15.75" (40.01 cm) x 12.75" (32.39 cm) Shipping Weight 21.50 lbs (9.75 kg) - Documents
Documents
- Reviews
Write Your Own Review