- Description
Details
The Electro-Voice EVID C10.1 subwoofer system is a complete low-frequency ceiling subwoofer package. The EVID C10.1 is designed to augment the low-frequency response of any EVID ceiling speaker. The package consists of a bezel assembly, grille, rear enclosure, 10" subwoofer and internal line-matching transformer.
The EVID C10.1 subwoofer utilizes a 2nd order crossover network to provide the correct bandpass frequency response for use with any EVID Ceiling loudspeaker. The C10.1 utilizes a transformer that offers a selection of 7.5 (70 V only), 15, 30 or 60 watts delivered to the subwoofer system using either 70 V or 100 V lines, or 8-ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fiberglass damping material, provides an optimum internal volume or extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides full-range pass through to additional speakers. A tile bridge is included for safe suspension of the C10.1 ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles.
The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music.
- Features
Features
- Supplemental LF for ceiling systems
- High-excursion woofer in a ported enclosure for extended lows
- Low pass network with overload protection
- Integrated transformer for 70 V, 100 V, or 8 Ω use
- Front-panel mode/wattage selector
- Internally damped heavy-gauge steel enclosure
- Safe, easy installation with included tile bridge and mounting ring
- White semi-gloss perforated grille
- Complete package requires no additional accessories
- 10" High-Excursion Transducer for extended LF
- Specification
Frequency Response (-10dB) 45Hz-180Hz Coverage (Conical) 180° Power Handling 150 W Cont./600 W Peak Sensitivity (SPL 1W/1m) 94 dB Max Calculated SPL 114 dB Cont. / 120 dB Peak Impedance 8 Ohms nominal (transformer bypass) Network 12 dB/oct Transformer Taps (7.5 - 70 V only), 15, 30, 60 Connectors Phoenix type removable w/ screw terminal & "loop-thru", 12-gauge wire Grille Perforated powder coated steel with safety tether Support Hardware Tile bridge, backing plate support, cutout template, paint shield Input Formats 8 Ω, 70 V, 100 V LF Transducer 10" (200 mm) Cutout Size 12.75" (324 mm) Chassis Size 10" (254 mm) Diameter (Max) 12.6" (320 mm) Height 11.93" (303 mm) Weight Net 15.43 lbs (7 kg) Shipping Weight (pair) 34.0 lbs (15.5 kg) - Reviews
Write Your Own Review