- Description
Details
The Control 40CS/T is a direct radiating, high impact, 8" subwoofer designed to produce powerful bass performance in an in-ceiling loudspeaker. Featuring high power handling and low distortion, the Control 40CS/T subwoofer is perfect for in-ceiling sound systems requiring higher fidelity and low end extension.
The Control 40CS/T also features a built-in passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42C, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance.
Featuring a large backcan along with a high powered driver, the Control 40CS/T provides extended bass response for a warm full-bodied tone. The system’s 200 mm (8 in) woofer features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity.
Ideal for small and large projects alike, the Control 40CS/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.- Features
Features
- High impact, direct radiating subwoofer with built-in passive crossover for two or four Control 42C satellite speakers
- 200 mm (8 in) woofer with butyl rubber surround with long excursion
- 8 ohm and 70V/100V operation
- Integrated backcan for easy "blind-mount" install
- Packaged with grille and tile rails for easy installation
- Elegant design fits any décor
- Specification
Transducer (Driver) 200 mm with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former Frequency Range (-10 dB) 32 Hz-300 Hz Frequency Response (± 3 dB) 50 Hz-180 Hz Power Capacity 200 Watts Continuous Program Power; 100 Watts Continuous Pink Noise Nominal Sensitivity (2.83V/1m) 95 dB (near corner), 89 dB (center of ceiling) Rated Maximum SPL 109 dB @ 1 m (3.3 ft) average, 115 dB peak, 115 dB @ 1 m (3.3 ft) average, 121 dB peak Rated Impedance 8 ohms (in bypass mode) Transformer Taps 80 W 40 W, 20 W, (& 10 W @ 70V) Input Connectors Six removeable locking 2-pin connectors with screwdown terminals. Max wire 12 AWG (2.5 mm) Knockouts Two (top and side) Ceiling Thickness Range Accommodates tiles/drywall up to 70 mm (2.75 inches) thick Cutout Size (Dia) 12.1" (307 mm) Dimensions (Dia x D) 13.1" (332 mm) x 13.3" (338 mm) Weight 17.9 lbs (8.1 kg) - Reviews
Write Your Own Review