- Description
Details
The JBL Control 26-DT is a 6.5" Coaxial Vented Ceiling Speaker assembly configured to install into standard ceiling backcans designed for 8" drivers. High power handling, wide frequency response and low distortion make the Control 26-DT ideal for sound systems requiring a higher fidelity sound.
The Control 26-DT includes a low saturation, high fidelity, low insertionloss transformer for use with 70.7 V and 100 V distributed line systems. The transformer has a top tap rating of 60 W.
The Control 26-DT matches industry standard mechanical specifications for 8" speakers. The four mounting points, at a diameter of 7.625", allow mounting either to a grille or a backcan, depending on the equipment used. The woofer features a polypropylene-coated cone and pure butyl-rubber surround for long life, even in high humidity environments. The coaxially mounted titanium coated tweeter provides crisp, clear highs. Diffraction-loading of the tweeter provides even coverage of the listening area. The 90° coverage pattern provides excellent projection for use in medium/high ceilings.- Features
Features
- Use instead of standard 8" driver
- Fits standard backcans for 8" speakers
- Comes complete with transducer, network and transformer
- Advanced crossover network provides natural sound and even coverage throughout listening area
- 60 Watt transformer for 70V or 100V distributed speaker lines
- Coaxial woofer with long-life butyl rubber surround and titanium coated tweeter
- Specification
Frequency Range (-10 dB) 70 Hz - 20 kHz Frequency Response (-3 dB) 95 Hz – 18 kHz Nominal Sensitivity 89 dB, 1 m/1W, 60W tap Nominal Coverage Angle 90° Crossover Frequency 3.5 kHz Directivity Factor(Q) 7.6 Directivity Index 8.8 dB Minimum Impedance 80 ohms @ 247 Hz (60W tap), 159 ohms, (30W tap), 318 ohms,(15W tap), 635 ohms, (7.5W tap) Rated Maximum SPL 106 dB SPL @ 1m (3.3 ft) Transformer Taps 70V: 60W, 30W, 15W, & 7.5W; 100V: 60W, 30W, & 15W Low Frequency 6.5" polypropylene-coated, 1" voice coil onaluminum former High Frequency 0.75" titanium coated polyester Mounting Points 4 screw holes at 7.625" diameter on center Termination Screw locking barrier strip Safety Agency Rating In accordance with IEC60849 / EN60849 Dimensions (H x Dia) 4.72" (120 mm) x 7.87" (200 mm) Net Weight (ea) 4.2 lbs (1.9 kg) Shipping Weight (pair) 8.8 lbs (4 kg) - Reviews
Write Your Own Review