- Description
Details
The IPD4-CM52-BGM is a 5.25" coaxial in-ceiling speaker for IP-addressable audio networks on the Dante platform which can provide economical system expansion through connection of up to three non-IP SoundTube CM52-BGM speakers directly to the IPD4 unit. It incorporates a 5.25" polypropylene driver with butyl rubber surround and a 1" silk dome tweeter in a sealed drawn steel backcan with a tuned port. The speaker delivers frequency response of 65 Hz – 22 kHz (-10 dB) with consistent, broad high frequency dispersion supplied through SoundTube's proprietary BroadBeam Ring™ technology.
Power, audio and control are delivered to the speaker via a CAT5 or CAT6 cable; connection on the other end is made to the STNet-Switch, which provides 40 watts PoE (Power over Ethernet) to each speaker. The speaker may also be connected to standard PoE or PoE Plus switches, which will provide lower input power to the speaker cluster; input power to the IPD4-CM52-BGM is shared among all speakers in the master-slave cluster. Audio connection to non-IP speakers in the cluster is made via a terminal strip on the IPD4 speaker; two channels of audio are available at each IPD4-CM52-BGM master unit and may be directed to the other speakers as needed.
Configuration and zoning of the IPD4 master speaker is done via software. Should any problem occur with the speaker during operation, it will be reported immediately via SoundTube monitoring software.
Mounting hardware for the IPD4-CM52-BGM is included and features SoundTube's SpeedWing™ constant-tension fixed-wing mounting system, along with a 21-gauge steel tile bridge which ensures rapid and secure installation in any drywall or drop-tile application. The tile bridge is color-coded to match the speaker. An optional pre-construction bracket is also available.
Applications
Developed for economical audio coverage expansion in Dante audio platforms, the IPD4-CM52-BGM is ideal for hotels, museums, houses of worship, education, retail stores, restaurants, airports or corporate installations. This speaker is based on SoundTube's CM-BGM series, which was engineered for high efficiency, good musicality and added bass response, so it is suitable for both background music and paging.
- Features
Features
- IP-addressable, self powered (PoE) speaker with audio and power outputs for three standard CM52-BGM speakers
- Dante™ I/O for interconnectivity with Dante-enabled audio systems
- One 5.25" (134 mm) polypropylene woofer with rubber surround and one 0.75" (19 mm) silk dome tweeter
- BroadBeam Ring™ technology for mid-range clarity and ultra wide off axis performance
- Fast connection of power, audio and control functions via one CAT5 or CAT6 cable
- 40 watts PoE provided by SoundTube STNet-Switch; also works with Standard PoE plus and PoE switches
- Input power is shared among speakers connected to IPD4 unit
- Two output channels available to additional speakers
- Provides report-back on any problems via SoundTube software
- Tuned port on baffle for added musicality and bass response down to 56 Hz (-10 dB)
- Incorporates a painted steel grille for lasting durability
- SpeedWing™ clamping system is adaptable to material thicknesses ranging from 0.035 in. (0.9 mm) to 2.5 in. (63.5 mm)
- UL 60065 and 2043 listed
- High-quality white painted finish. Custom colors available
- Included accessories: Color-coded (green) tile bridge, UL listed conduit clamp, paint shield
- Optional accessories: Color-coded (green) pre-construction bracket (AC-CMEZ6/8-PCB)
- Specification
System Type 5.25" coaxial, in-ceiling, ported, Dante™-enabled, network Frequency Response (-3 dB) 67 Hz - 20 kHz Frequency Response (-10 dB) 56 Hz - 22 kHz Maximum Power SPL dB @ 1 M 93.0 dB Coverage Angle (-6 dB @ 2 kHz) 180º Coverage Angle (-6 dB @ 10 kHz) 112º Coverage Angle (Averaged 2-10 kHz) 141º Directivity Factor (Q) 3.8 (averaged 100 Hz - 10 kHz) ; 2.1 (2 kHz) Directivity Index (DI) 5.1 dB (averaged 100 Hz - 10 kHz) ; 3.3 dB (2 kHz) Low Frequency Driver 5.25" (134 mm) Polypropylene cone, rubber surround High Frequency Driver 0.75" (19 mm) Silk dome tweeter Low Frequency Voice Coil 1" (25.4 mm) Crossover Frequency 5.0 kHz Network Type: Low Pass 12 dB per octave, 2nd order Network Type: High Pass 12 dB per octave, 2nd order Enclosure Material Drawn steel backcan with ABS baffle Grille Painted steel Inputs RJ45 ethernet port Regulatory - UL UL 60065 & UL 2043 listed Regulatory - CE Approved RoHS Approved Packaging One Speaker Per Box Colors White Included Accessories Tile bridge, UL-listed flex conduit clamp, paint shield, hole template, wire nuts Optional Accessories Pre-construction bracket (AC-CM6/8-PCB) Mounting Hole Diameter 10.5" (266.7 mm) Minimum-Maximum Ceiling Thickness 0.035" (0.9 mm) - 2.5" (63.5 mm) Backcan Dimensions (H x Dia) 5.75" (146.1 mm) x 9.67" (245.6 mm) Visible Dimensions (H x Dia) 0.34" (8.6 mm) x 11.75" (298.5 mm) Weight 8 lbs (3.6 kg) Shipping Weight 9 lbs (4.1 kg) - Documents
Documents
- Reviews
Write Your Own Review