- Description
Details
The CSS-H30 paging horn is a cost-effective CSS Commercial Solutions Speaker, designed for the needs of a wide range of commercial applications.
Designed for demanding environmental conditions, the JBL CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns.
Constructed of sturdy ABS with corrosion‐resistant all-stainless-steel mounting bracket and hardware, this paging horn includes a built‐in UL registered multi‐tap transformer (30‐Watt) for use with 70V and 100V distributed speaker lines, with a screwdriver adjustable tap switch, and a bypass position for direct 8-ohm operation.
Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protective signaling systems.- Features
Features
- Excellent voice range clarity for announcement and paging
- High sensitivity delivers high sound levels with minimal power amplification
- Focused 50° horizontal by 70° vertical coverage for long throw capability
- Phenolic diaphragm driver for outdoor durability and high reliability
- UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass
- Built-in high-pass filter enhances reliability by protecting against low frequency damage
- Highly weather-resistant, with stainless steel bracket and hardware
- Specification
Frequency Response (-10 dB) 380 Hz – 6 kHz Coverage Pattern 50° Horizontal by 70° Vertical (at 2 kHz and Averaged 1 kHz – 4 kHz) Included High-Pass Filter Passive 350 Hz High-Pass Filter Built-in Directivity Factor (Q) 15.8 (2 kHz) Directivity Index (DI) 12 (2 kHz) System Power Rating 30W (120W peak), 100 hours Sensitivity (1W, 2.83V@ 1m) 108 dB, Ave. 1 kHz – 6 kHz 112 dB at 1.4 kHz Maximum SPL (1m)(8Ω Setting) 123 dB cont Ave. (129 dB peak), 1 kHz – 6 kHz; 127 dB cont Ave. (133 dB peak), 1.4 kHz, 30W input Nominal Impedance 30W/70V, NC/100V tap: 167 ohms
15W/70V, 30W/100V tap: 333 ohms
7.5W/70V, 15W/100V tap: 667 ohms
3.8W/70V, 7.5W/100V tap: 1333 ohms
1.9W/70V, 3.8W/100V tap: 2666 ohms
8 ohms at 8 ohm direct settingTransformer Taps 70V: 30W, 15W, 7.5W, 3.8W, 1.9W
100V: 30W, 15W, 7.5W, 3.8WDriver 1.5" Diameter with Phenolic Diaphragm Horn Material ABS Mounting Hardware Stainless steel powder-coated U-bracket (yolk) with 3 x 0.41" Diameter Mounting Holes Color RAL9016 (Horn and Bracket) Input Connection 12" Pigtail to Bare Wire; Entrance Via Watertight Fitting Environmental IP-65 Rating Per IEC529, Salt Spray Per B117, Stainless Steel U-bracket and Exterior Hardware Safety Agency Transformer UL Registered per UL1876 "Isolating Signal and Feedback Transformers for Use in Electronic Equipment" Dimensions (Horn) 8.2" (206 mm) x 11.2" (285 mm) x 11.3" (287 mm) Weight 4.5 lbs (2 kg) Shipping Weight 6 lbs (2.7 kg) - Documents
Documents
- Reviews
Write Your Own Review