- Description
Details
The Control 88M outdoor mushroom landscape speaker is designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.
- Features
Features
- 8" highly weather-resistant driver
- 1" soft-dome highly weather-resistant tweeter
- 120W Pink Noise Power Handling (240W program) in direct 8Ω setting, plus built-in 60W 70V/100V multi-tap transformer
- Tough polyethylene highly weather resistant enclosure
- Fully isolated center chamber for wiring protection
- High fidelity sound character with broad frequency range of 47Hz - 16kHz
- Specification
Frequency Response (-10dB) 47 Hz – 16 kHz Power Capacity (at Low-Z) 240W Continuous Program Power
120W Continuous Pink NoiseTransformer Taps 60W, 30W, 15W @ 70V or 100V
(plus 7.5W @ 70V only)Frequency Response (±3 dB) 60Hz - 15 kHz Maximum Input Voltage 28.0 V Sensitivity 87 dB, 1W @ 1m (ave. 80Hz - 16kHz) Nominal Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground) Directivity (Q) 2.1 Directivity Index (DI) 3.2 dB Maximum SPL 108 dB @ 1m Nominal Impedance 8Ω (at 8Ω setting) Minimum Impedance 6.6Ω at 9.5kHz Insertion Loss <0.5 dB at any tap setting Thru Setting 8Ω nominal Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF Recommended Protective 45 Hz for 8Ω operation, 24 dB/oct High-Pass 80 Hz for 60W tap, 24 dB/oct
50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/octLow Frequency Driver 8" (200 mm) diameter LF driver, Kapton™ former, 1.5" (38 mm) voice coil, polypropylene cone and polyurethane surround High Frequency 1" (25 mm) diameter HF driver Polyetherimide (PEI) dome Enclosure Material LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated Grille Powder coated stainless steel Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated Agency Ratings UL1480, Transformer UL Recognized per UL1876, ROHS compliant Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section) Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS). Colors Hunter Green, RAL6018 Included Accessories (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver Installer-Supplied Required Tools 0.875" (22 mm) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure. Dimensions (H x Dia) 20.7" (524 mm) x 14" (355 mm) Weight 17 lbs (7.8 kg) Shipping Weight 23 lbs (10.5 kg) - Documents
Documents
- Reviews
Write Your Own Review