More Views

Community CS6 6.5" 2-Way Surface Mount Loudspeaker - Pair (Discontinued)
Part # CS6
Model # CS6

The Community CS6 6.5 inch Two Way Surface Mount Loudspeaker incorporates the same full-range loudspeaker (as the C6) in a black or white paintable ABS surface mount enclosure. It also has a more focused dispersion than the smaller CS4. It features a genuine coaxial design using separate magnets for the LF and HF drivers.

Availability: Limited Stock - Call for Availability

* Required Fields

Pro Acoustics Price $0.00

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The Community CS6 6.5 inch Two Way Surface Mount Loudspeaker incorporates the same full-range loudspeaker (as the C6) in a black or white paintable ABS surface mount enclosure. It also has a more focused dispersion than the smaller CS4. It contains a proprietary Tru-Phase™ waveguide that produces a consistently wide conical polar response up to 16 kHz. The CS6 features a genuine coaxial design using separate magnets for the LF and HF drivers for reduced distortion and high sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products.

Easily outperforming loudspeakers of a larger size format, the CS6 provides high power handling, high sensitivity and realistic sound reproduction. This loudspeaker is equipped with a built-in autoformer, allowing large numbers of distributed loudspeakers to be powered from a 70V or 100V amplifier output. A convenient front-accessible power tap switch is hidden behind a rotatable logo. Installation is simple and flexible using the included multi-angle pan-tilt bracket which allows low profile mounting and precise positioning of the enclosure in either horizontal or vertical orientation.

Thanks to the internally reinforced, black or white paintable ABS enclosures, zinc-rich epoxy dual-layer powder-coated grilles and brackets, weather-treated drivers, and the included IP56 sealed wiring cover, all standard surface mount models are equally suited for indoor or outdoor direct exposure applications.

Features

Features

  • Clean and simple architectural design
  • Same components and voicing as the Commercial Design ceiling loudspeaker family
  • High efficiency, high output, high intelligibility, low distortion
  • Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
  • Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
  • Low profile pan-tilt mounting yoke included
  • Horizontal or vertical mounting orientation
  • Weather-resistant construction with treated drivers, two-layer powder coated grilles and protected wiring ingress
  • Available in standard black or white finishes
Specification
Operating Range65 Hz - 13.5 kHz (-10 dB)
Frequency Response90 Hz - 12.5 kHz (-3 dB)
Max Input Ratings (8 ohm)60W continuous, 150W program 22 volts RMS, 43.8 volts momentary peak
Transformer Taps—70V; 100V30W, 15W, 7.5W, 3.75W and 8 ohm selectable; 30W, 15W, 7.5W, and 8 ohm selectable
Sensitivity (1W/1m)90 dB SPL (90 Hz to 12.5 kHz 1/3 octave bands), 91 dB SPL (250 Hz to 4 kHz speech range)
Maximum Output108 dB SPL / 114 dB SPL (peak 8 ohm)
Nominal Impedance8 ohms
Minimum Impedance6.4 ohms @ 10 kHz
Nominal Coverage120º conical (+60° / -60°, 1 kHz to 6 kHz)
Axial Q / DI4.8 / 6.8, 500 Hz to 6 kHz
Crossover Frequency2 kHz
Recommended SignalProcessing70 Hz, 24 dB/Oct high pass filter
DriversLF 1 x 6.5" cone; HF 1 x 3/4" exit compression driver
Driver ProtectionSelf-resetting solid state circuit breaker
Input Connection4-pole Euroblock connector with two pair of non-interrupt parallel connections
ControlsFront-accessible wattage / low impedance selector switch hidden behind the rotatable logo
EnclosureABS plastic, matte finish, paintable
FinishBlack or white
Mounting/RiggingProvisionsLow profile, multi-angle, pan-tilt mounting yoke
GrilleDual-layer powder coated steel, black or white finish
Safety FeaturesBuilt-in safety cable attachment eyebolt
EnvironmentalIP55 rated loudspeakers, IP56 rated connector cover, designed to Mil Spec 810
Required AccessoriesElectronic high pass filter
Supplied AccessoriesLow profile, pan-tilt mounting yoke; flat-headscrew driver
Optional AccessoriesM8 x 15.5mm Blind Insert for 3rd party accessory attachment
Dimensions (H x W x D)6.96" (177 mm) x 11.8" (300 mm) x 10.7" (272 mm)
Weight (without bracket)7.1 lbs (3.2 kg)
Weight (with bracket)9 lbs (4.1 kg)
Shipping Weight (Pairs)23 lbs (10.4 kg)
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Community CS6 6.5" 2-Way Surface Mount Loudspeaker - Pair (Discontinued)