- Description
Details
Ease-of-installation is the driving principle behind QSC's next generation of small format, surface mount loudspeakers. Innovations found on AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system.
Housed in rugged ABS enclosures for long-term durability, S12 loudspeakers employ DMT (Directivity Matched Transition) which matches the LF and HF coverage at the crossover point. This ensures even coverage across the listening plane for smooth, coherent audio reproduction. The 1.4in diaphragm, 1-in exit compression driver on the S12 delivers crisp, detailed high-frequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. To further enhance performance, tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC amplifiers. Moreover, the low saturation transformers offer premium performance on 70/100V distributed audio lines.
Installers will appreciate flexible mounting options. Euroblock connectors allow pre-wiring of the system and the included.
X-Mount hardware enables the installer to mount the bracket and then simply lift the loudspeaker onto the mount and lock it into place. Moreover, the loudspeaker can attach to its mount on any plane to facilitate multiple deployment configurations.
AD-S loudspeakers can easily be mounted to any weight bearing, flat surface. Knurled surfaces on the mount's pivot points ensure that the loudspeaker deployment angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle. S12 models also feature M10 installation points for suspending the loudspeaker via eye-bolts as well as mounting points for an optional yoke bracket.
- Features
Features
- 12-inch weather treated woofer; 1.4-inch compression driver
- 75° conical DMT coverage
- Maximum peak SPL 126 dB
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Optional Yoke mount and M10 Kit-C for additional installation versatility
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-SYS processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, and BIM information available online
- Specification
Effective Frequency Range 52 – 20k Hz Rated Noise Power / Voltage 300 watts / 50 volts (rms) Broad-Band Sensitivity 95 dB SPL Coverage Angle (-6 dB) 75° Directivity Factor (Q) 10 Directivity Index 11 dB Maximum Continuous SPL 120 dB Maximum Peak SPL 126 dB Rated Impedance 8 ohms Recommended Amplifier Power 600 watts Transformer Taps 70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass; 100V: 100, 50, 25 and 8 ohm bypass HF Transducer / LF Transducer 1" exit/1.4” voice-coil compression driver; 12" weather resistant, 3"/76 mm voice-coil Input Connector Type Euroblock connector with parallel output terminals Enclosure Material Painted ABS polymer Grille Material Powder coated aluminum Ingress Protection IP-54 Operating Environment Designed for indoor and outdoor use Operating Temperature Range -20 to 50 °C / -4 to 122 °F Dimensions (H x W x D) 23.4" (594 mm) x 13.9" (354 mm) x 12.7" (323 mm) Weight 35.2 lbs (16 kg) Shipping Dimensions (H x W x D) 34.5" (765 mm) x 17.9" (455 mm) x 17.2" (437 mm) Shipping Weight 46.3 lbs (21 kg) - Videos
Videos
- Reviews
Write Your Own Review