Inputs Cards & Modules
-
TOA T-12S Unbalanced Line Input with Music-On-Hold Output and Input Mute-Receive
The TOA T-12S is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a balanced line output, as well as an input that can control muting operations of a signal output.
List $156.30Price $126.30Savings $30.00 (19%) -
Bogen Communications VAR1 Voice-Activated Relay for Paging Systems
The Bogen Communications VAR1 Voice-Activated Relay is a DPDT relay device that is activated when an audio signal is detected at the microphone preamp or at 70V, 25V, or 600-ohm line-level inputs.
-
RDL D-HA1A Format-A Stereo Headphone Amplifier
The D-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. D-HA1A receiver stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.List $234.30Price $175.72Savings $58.58 (25%) -
TOA D-922E Microphone Line Input Module
The TOA D-922E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.
-
RDL ST-MX3 3 Channel Audio Mixer
The RDL ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments.
List $239.49Price $179.62Savings $59.87 (25%) -
TOA RM-200RJ Terminal Unit
The TOA RM-200RJ is designed to convert the RJ45 connector into a screw terminal block. It is used to connect between a trunk cable (such as CPEV cable) and a feeder cable (such as LAN cable) in wiring a remote microphone. -
MIPRO MRM-70B Single-Channel UHF Diversity Receiver Module
The MIPRO MRM-70B is a 16-channel single receiver module, and features advanced diversity technology for optimum reception quality, one-touch scan for one of the 16 clear, interference-free frequencies, and has Dual "PiloTone & NoiseLock" circuits that minimize interference.
-
TOA WTU-M9800 Wireless Tuner Module for 900 and 9000 Series
The TOA WTU-M9800 Wireless Tuner Module is designed to plugged into the 9000 series, 900 series and TOA's other equipment. It is used in conjunction with UHF wireless equipment for vocal or speech reinforcement applications. -
TOA NM-01 Noise and Sound Masking Generator Module
The TOA Electronics NM-01 is a noise and sound masking module to be used in conjunction with TOA's 9000M2, 900, 700 and BG-2000 series amplifiers.
-
BSS Audio BLU-Si BLU Link Card
The BSS Audio BLU-Si BLU link Card, which enables Soundcraft Si Expression, Si Performer & Si Compact mixing consoles to be connected to components equipped with a BLU link interface to provide expanded audio distribution, etc. -
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
TOA TT-104B 304L Program Timer
The TOA TT-104B 304L is a program timer that comes with 4 outputs and controls 4 different broadcasts. With use of an optional rack-mounting bracket, it can be mounted in EIA Standard equipment (occupying 1 unit size).
-
Atlas Sound IED1522LR Dual Logic Input and Dual Relay Output IO Module
The Atlas Sound IED1522LR Logic / Relay Module is a cost-effective interface module that operates as an integral part of an IED GLOBALCOM® system, as a web-enabled, programmable relay device for a wide variety of remote control and automation applications.
List $1,224.99Price $981.99Savings $243.00 (20%) -
NEXO NXAE104 AES/EBU Network Card for NXAMP
The NEXO NXAE104 is a network card for NXAMP amplifiers. The NXAE104 receives 4 audio channels in AES/EBU format.
-
Atlas Sound IED1516LI 16 Input Logic Module
The Atlas Sound IED1516LI is a network logic input device used to interface with an IED GLOBALCOM® announcement control system. It provides 16 optically-isolated inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.
List $1,297.99Price $1,038.99Savings $259.00 (20%) -
Atlas Sound IED1516LI-E 16 Input Logic Expansion Module
The Atlas Sound IED1516LI-E is a 16 input expansion module that connects directly to a 1516LI to bring its total input capacity up to 32 inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.
List $1,297.99Price $1,038.99Savings $259.00 (20%) -
Atlas Sound IPUSBD-8 8-Channel USB Dante Network Audio Device
The Atlas Sound IPUSBD-8 is a Dante™ network audio device providing 8x8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports.
List $2,014.99Price $1,614.99Savings $400.00 (20%) -
NEXO NXES104 EtherSound Network Card for NXAMP
The NEXO NXES104 is a network card for NXAMP amplifiers. The NXAE104 extracts 4 audio streams (24 bits / 48 KHz) among the 2 x 64 channels of an ES100 EtherSound™ stream.
-
Atlas Sound IED1522AIOLR CobraNet Audio I/O Module with Logic and Relays
The Atlas Sound IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio.
List $2,488.99Price $1,992.99Savings $496.00 (20%) -
Bose AmpLink 24-Channel Input Card for PowerMatch Power Amplifiers
The Bose AmpLink input card for PowerMatch configurable professional power amplifiers installs into the digital expansion slot to receive 24 digital audio channels from a Bose DSP via a shielded CAT 5 cable. Each card includes a THRU connection for daisy-chaining multiple AmpLink amplifiers. -
TOA U-01R Unbalanced Line Input Module
TOA U-01R is an unbalanced line input with RCA pin jack connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players.List $64.80Price $52.40Savings $12.40 (19%) -
TOA U-01P Unbalanced Line Input Module
TOA U-01P is an unbalanced line input with a phone jack connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players.List $69.30Price $56.00Savings $13.30 (19%) -
TOA U-03R Unbalanced Line Input with High Low Cut Filters
The TOA U-03R is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a low-cut and a high-cut filter.
List $82.70Price $66.80Savings $15.90 (19%) -
TOA L-01S Line Matching Input Module
TOA L-01S is a line input module to be used in conjunction with the 900 series components and other TOA equipment. It has a transformer balanced line matching input, with removable terminal block connector.