70 Volt Volume Controls

The Lowell 50LVC volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang standard wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Atlas Sound AT35 plate mounted attenuator is part of a high-quality auto transformer series that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems.

The Lowell 25LVC-DB volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Quam QC10 Attenuator Series is a single gang, continuous rotary, ten-step audio level attenuator with an OFF position. The finishes vary with the model. Refer to the technical specification. The knobs are black with white indicators.

The Lowell 100 LVC volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a standard wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 25LVC-RM Rackmount Volume Control is a 25W autoformer attenuator (volume control) with 3dB steps for great for use with a 100/70/25V speaker line. It includes 1-gang standard wall plate with a rotary knob in variety of colors and it ETL Listed.

The Lowell 25LVC volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Atlas Sound AT100-PARM is a high-quality auto transformer that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems.

The Lowell 100LVC-RM rackmount volume control is a 100W autoformer attenuator type volume control with 1.5 or 3dB steps for use with 100/70/25V speaker line (mono). It features a black adhesive dial scale with rotary knob and Phoenix termination.

The Lowell 25LVC volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Lowell 25LVC volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Lowell 25LVC-D Decora Volume Control is a 25W autoformer attenuator (volume control) with 3dB steps for great for use with a 100/70/25V speaker line. It includes 1-gang decora wall plate with a rotary knob in variety of colors and it ETL Listed.

The Lowell 25LVC-DB volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Lowell LV-5K Potentiometer Volume Control has a 5W power rating and 5000 ohm impedance for applications with a constant voltage of 25V, 70V, or 100V loudspeaker systems. Attenuation is continuous with no stops at minimum or maximum. The LV-5K includes a dial scale (0-10) and fluted black knob.

THe Lowell 50LVC-RM Rackmount Volume Control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V speaker line (mono). Includes 1-gang standard wall plate with rotary knob. It features a black adhesive dial scale with rotary knob and Phoenix termination and is ETL Listed.

The Lowell 50LVC volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang standard wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Atlas Sound E408-100 Precision Plate Mounted Attenuator was specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. Employs a ten-position, non-shorting rotary switch without stop.

The Lowell 50LVC-DW decora volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang decora wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Lowell 50LVC-DA decora volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang decora wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Lowell 50LVC-DB decora volume control is a 50W autoformer attenuator (volume control) with 3 dB steps is for use with 100/70/25V or 8 ohm speaker line (depending on model selected). Includes 1-gang decora wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Lowell 100 LVC volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a standard wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 100LVC-RM rackmount volume control is a 100W autoformer attenuator type volume control with 1.5 or 3dB steps for use with 100/70/25V speaker line (mono). It features a black adhesive dial scale with rotary knob and Phoenix termination.

Atlas Sound WPD-RISRL volume control input select switch is a decor style wall plate that is designed for use with the AA50PHD, AA100PHD, AA200PHD, or AA400PHD mixer amplifiers to use the remote input selection (RIS) feature.

The Atlas Sound E408-250 is specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. It employs a ten-position, non-shorting rotary switch without stop. The attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series including the UL listing.)