- Description
Details
The key to the success of your project is the ability to give the Pro AV System clients the ability to intuitively control the sound system within defined parameters.
Sophisticated, network audio products are still operated by inexperienced personnel. Ashly offers both network and serial remote controls that allow clients to easily select presets, route sources to specific rooms & zones and turn the volume up or down.
Control your system from any location with this RW-8C wall-mountable programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector. Using Protea NE Software, each fader is assigned to adjust the level of one or more input or output channels or control the DSP matrix mixer. A master fader controls the overall level of all faders.
- Features
Features
- Eight assignable faders and one master fader
- On/Off switch with LED for each fader
- Adjusts levels on single or combined input or output channels
- Wire directly to host unit, no network required*
- Control output at matrix mixer
- Shipping weight: 2 lbs (1 kg)
- Safety/compliance: CE, FCC, RoHS
Compatible Ashly Products Include:
- nXe amplifiers**
- nXp amplifiers
- Pema amplifiers
- NE multi-channel amplifiers**
- ne24.24M matrix processor
- NE8800/4800/4400 network processors
- Specification
Max Data Cable Length Up to 1000 ft using #24 gauge twisted pair Fader Range +10dB to -75dB Environmental 40-120 deg. F (4-49 deg, C) Power Requirements Phantom Power from host unit Connections Euroblock Mounting 4-ganged wall box (US) Dimensions (H x W x D) 4" (103 mm) x 7.94" (202 mm) x 0.8" (20 mm) Net Weight 1 lbs (0.45 kg) Shipping Weight 2 lbs (1 kg) - Documents
Documents
- Reviews
Write Your Own Review