Remote Volume Controls

The Yamaha DCP1V4S Digital Control Panel connects to the Yamaha MA2030 Mixer Amplifier for remote volume control.

When used in conjunction with the DM8000 Digital Audio Processor, the Klark Teknik CP8000UL provides easy control over volume and selection for up to 6 auxiliary inputs.

The AtlasIED WPD-VC10K is a decor style wall plate featuring an adjustable 10kΩ potentiometer designed to remotely control the level of connected AtlasIED products like amplifiers. The unit can function with VCA 2 or 3 conductor systems and uses a 2 or 3 conductor interface connection designed to work with the included Phoenix style connector.

The TOA WP-700-AM is a wall remote control panel, designed to remotely control MA-725F (or MM-700F) matrix mixer amplifiers.

The DBX ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePRO products.

The DBX ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.

The Yamaha DCP4S Wall Control Panel is used for the MTX Series and can be used with up to 8 controllers per 1MTX with CAT5 cable.

The Audio Enhancement WPA-03 Wall Plate expands the features of the CA-30 Amplifier. It provides an audio input that the teacher can use with any multi-media device (i.e. IPod™, Laptop Computer, etc.).

Control your system from any location with the Ashly WR-5 Programmable Multi-Function Decora Wall Remote Control. This device fits in standard wall boxes and uses low gauge wire for hook-up. WR-5 is a programmable remote button controller for Ashly amps and processors that have a serial data connector.

The RC-20 Direct Play Remote brings instant playback through flash start to the CD-500 or CD-500B – the only CD players available with flash start capability.

The Yamaha DCP4V4S Digital Control Panel is used for the MTX Series and can be used with up to 8 controllers per 1MTX with CAT5 cable. It has a max cable length up to 200m.

The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.

The OWI MC4-BT is a Mic/Line audio mixer with a localized Bluetooth receiver and a manual volume control of Bluetooth signal.