- Description
Details
Optimized for use with the EX-1280C, the EX-4ML Dante endpoint, is a convenient, cost effective solution for connecting up to 4 conferencing microphones over a single cat-5/6 cable. Whether used under a conference table, daisy-chained with other EX or endpoints, or standalone in a rack, the EX-4ML adds 4 high-quality microphone/line inputs, 4 GPI, and 8 GPO to your networked audio system. Autodiscovery, Drag and drop programming, auto-routing, and simplified logic control in ControlSpace designer make configuring the EX-8ML easy. Tasks such as configuring microphone LED status and microphone mute actions are greatly simplified within ControlSpace designer requiring not external control system programming.
Whether used under a conference table, daisy-chained with other EX endpoints, or standalone in a rack, the EX-4ML simplifies design, reduces analog wiring, improves audio quality and provides solutions where cabling options are limited.
Designed for a wide range of applications, including:
• Boardrooms
• Medium/large conference rooms
• Courtrooms
• Distance learning
• Auditoriums
• Multi-purpose spaces- Features
Features
- One-cable-from-the table connectivity supports PoE , Dante™ audio networking, logic I/O and LED power to maximize ease of integration
- Broad conference microphone compatibility with 4 high-quality mic/line input channels, each featuring 48V phantom power, 12V LED power, 1 logic input and 2 logic outputs for interfacing with microphone pushbuttons and indicators
- Dante™ audio networking for connection to other Dante-enabled products over Ethernet-based networks
- Daisy-chainable power output allows multiple EX endpoints to be powered through one external power supply
- Rotatable mounting tabs allow for multiple mounting options
- Low-profile aluminum enclosure with integrated LED indicators for unobtrusive under-table mounting
- Simplified software configuration via ControlSpace Designer software. Supports autodiscovery, auto-routing, and logic presets for microphone LEDs and pushbuttons
- Optional installation accessories include a magnetic mounting plate for single-handed under-table mounting, and a microphone extension cable
- Specification
Audio Inputs Input Channels Four (4) analog, balanced microphone/line level Connectors Four (4) 3.81 mm Euroblock connectors, 6-pin Phantom Power +48VDC, software selectable per input Control GPIO 2 logic outputs (100mA low, 8V open, 10mA @ 2.5V high)
1 logic input (0 to 5V, threshold = 1.6V, 2K pull-up to 5V)Gain Settings 0 / +15 / +30 / +45 dB, software selectable Input Impedance > 1.8 kΩ at any gain setting Equivalent Input Noise –115 dBu (+45 dB gain) Maximum Input Level +20 dBu (using -12 dB gain setting) System THD < 0.01 % at any gain setting, input signal 3 dB below maximum Frequency Response 20 Hz — 20 kHz, ± 1 dB Network Connectors Two (2) RJ-45, one front (supports PoE), one rear Network Ethernet, 1 Gb, with Dante™ Audio Networking Power Microphone LED power 12 VDC, 200 mA PoE Class Class 0 802.3af PoE PD compliant External Connectors (1) 3.81 mm Euroblock connector, 2-pin, (1) 5.5 mm barrel with positive center External Power Range 24 VDC, daisy-chainable Power Consumption 4.3 watts plus 1 watt for Phantom Power Software Application ControlSpace Designer software version 5.0 or later General LED Status Indicators Power LED, four (4) tri-color signal status for input channel pairs Digital Conversion 24 kHz / 24-bit Certifications FCC Part 15 Class A, CE (EN 55022 Class A) Operating Temperature 32° F — 104° F (0° C — 40° C) Dimensions (H x W x D) 1.1" (28 mm) x 8.4" (214 mm) x 4.5" (116 mm) - Documents
- Videos
Videos
- Reviews
Write Your Own Review