- Description
Details
TOA P-912MK2 Amplifier - Input Module Slot Accepts Most TOA Plug-in Modules for Custom System Configurations
with 25V, 70V and 8-Ohm Transformer Isolated Speaker OutputsModular design allows fast and easy custom configurations. Engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation. One Module Slot accepts TOA plug-in modules for unmatched flexibility.
The TOA P-912MK2 (120 W) Single Channel Power Amplifier is engineered for high performance with wide frequency response, very low noise and distortion and excellent output regulation. A single module slot allows you to easily configure custom configurations using TOA plug-in modules with an extensive array of features and connector types. Outputs include transformer isolated 25 V, 70 V and 8 ohm plus a direct low impedance mode if non-transformer operation is required.
- Features
Features
- Power Amplifier Features:
- Modular design allows fast and easy custom configurations
- Engineered for high performance with wide frequency response, very low noise and distortion and excellent output regulation
- One module slot accepts TOA plug-in modules for unmatched flexibility
- 60 watt RMS output power
- 25V, 70V and 4/8 ohm speaker outputs with screw terminal connector and protective cover plate
- Protection Circuitry prevents potential damage from overload, short-circuit, DC offset or overheating
- Front Panel Features:
- Master Volume Control
- Normal, Peak, Power, Protect, and Signal LEDs provide instantly recognizable status indication
- Rear Panel Features:
- Direct Input for connecting an external mixer or recording device
- 20 dB Input Gain Switch for high or low input levels
- Low Cut Switch to limit low-frequency response
- Volume Control Security Cover included (1), model YA-920
- Specification
Output Power 120W RMS Power Bandwidth (D) 20 - 20k Hz, 0.5% THD; (T) 50 - 20k Hz, 0.5% THD Frequency Response (D) 20 - 20k Hz, ±1 dB; (T) 20 - 15k Hz, ±1 dB (T) 20 - 20k Hz, +1 dB / -3 dB Total Harmonic Distortion 0.01% at 1k Hz, rated output Inputs 1 modular input port, 1 direct input, Use only one of direct input or modular input port Input Sensitivity & Impedance Input port: 100 mV or 1000 mV (switchable) / 10 kΩ
Direct port: 100 mV or 1000 mV (switchable) / 10 kΩOutputs (T)=Transformer, (D)=Direct Main (T): 8 Ω, 25 V & 70 V, balanced Main (D): 4 Ω, unbalanced Output Regulation (1k Hz) (D): Less than 0.5 dB, no load to full load (T): Less than 1.0 dB, no load to full load Dynamic Range Input level switch in 0 dBV (1000 mV) position: 108 dB Input level switch in -20 dBV position: 90 dB Indicators Normal, Peak, Power, Protect, and Signal LEDs Protection Self-protection, with internal AC fuse Power Consumption 180W Temperature Range 12° F to 140° F (-10° C to +60° C) Color Black Other Features Output connects approx. 5 seconds after switching power on Dimensions (H x W x D) 3.9" (99.1 mm) x 16.5" (420 mm) x 14.1" (358 mm) Weight (without modules) 24.0 lbs (10.9 kg) - Documents
Documents
- Reviews
Write Your Own Review