- Description
Details
Inside the Design
This Bluetooth-enabled sound system is ideal for small retail stores that desire high-quality background music to keep their customers in a good mood while they're shopping. You can connect several sources such as a Satellite Tuner, CD/DVD player or stream wirelessly from your smartphone or other devices, you can also add a microphone for paging if needed. This system includes four QSC AD-C4T 4.5" ceiling mount speakers, a JBL VMA160 60W 5-channel Bluetooth-enabled mixer amplifier, a JBL CSR-V 1-zone wall remote control and speaker wire for installation. This small business speaker system is great for boutiques, small stores in the mall, vape/smoke shops or any retail space roughly 1,200 sq ft where you want to add the perfect ambiance for your shoppers.Sound System Features:
- High-quality background music system for up to 1200SF with capability for paging, just add a microphone
- Premium speakers provide quality sound where performance, consistent coverage, and aesthetics are paramount
- Cost-effective 5-channel input Bluetooth-enable mixer/amplifier designed with convenient and flexible features
- Voice-activated ducking is available on input channel 2 muting all other channels
- CSR-V offers source selection and/or volume control from an elegant user interface
About the System Components
QSC AD-C4T Ceiling Speakers
The QSC AcousticDesign™ AD-C4T is a 4.5" two-way ceiling loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations. The AcousticDesign™ series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in both ceiling or surface applications, the AcousticDesign series allows integrators seamless transitions within blended installations. The AD-C4T features a high quality 4.5" weather treated paper cone woofer with a 1" voice coil and a 1" aluminum dome tweeter which is positioned on a DMT waveguide in front of the woofer. DMT (Directivity Matched Transition™), is QSC’s design philosophy where the high-frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. The result is a coherent transition between transducers with improved off-axis power response for consistent 150° conical DMT coverage.
JBL VMA160 5-Channel Bluetooth Mixer Amplifier
The JBL VMA160 is a cost-effective 5-channel input Bluetooth-enable mixer/amplifier with low impedance functionality (4Ω, 8Ω) and high impedance 60W @ 70V and 100V output. They are designed with convenient and flexible features to be used by commercial integrators worldwide, particularly price-sensitive emerging markets and include multi-source mixing, VOX function, and priority muting. Voice-activated ducking is available on input channel 2. The audio input level required to activate ducking is set using the trim pot on the rear panel. Adjusting in the counterclockwise direction will reduce that level while the full clockwise setting will disable the VOX function. The VMA160 may use input channel 2 as a priority channel, muting all other channels when pins 4 and 5 are shorted using a switch closure. Similarly, input 5 can exercise priority over all inputs into output amplifier CH2. Input 2 will have priority over both amplifiers CH1 and CH2 if the routing DIP switch #2 is set to ON.
JBL CSR-V 1-Zone Wall Remote Control
JBL CSR-V offers source selection and/or volume control from an elegant user interface. The JBL Commercial® CSR series remote controls can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 connectors and can be placed up to 1000 ft (305 m) from the mixer. The CSR-V remote control allows you to remotely select the source and/or control the volume on the CSM mixer. Using CSR-V remote control with your CSM mixer, you can remotely control the volume of the source selected by the mixer. Available in black or white.
- Features
Features
QSC AD-C4T AcousticDesign™ 4.5" Ceiling Mount Speakers:
- Consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications
- DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Advanced Intrinsic Correction™ voicings available via Q-SYS™ networked audio processing platforms, including CXD amplifiers
- Low-saturation and low-loss 70/100V transformers with 16Ω bypass
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- UL1480 and UL2043 certified EN54-24 Type A (pending)
- Available in black (RAL 9011) or white (RAL 9010)
JBL VMA160 60W 5-Channel Bluetooth Enabled Mixer Amplifier:
- 5 inputs with 1 output of 60W of power
- Independent bass and treble controls for each output channel
- 100V and 70V output, or 4Ω/8Ω
- Paging Chime, and Priority muting
- Works with JBL CSR-V wall controllers
- Balanced mic/line inputs; RCA (.775V) inputs
- Rack mounting hardware included
JBL CSR-V 1-Zone Wall Remote Control:
- 1-Zone volume control
- Equipped with RJ-45 / Cat. 5 connectors
- Up to 1000’ (305 m) from CSM device
- For use with all CSMA, CSM, and CSA (Z) models
- Available in black or white
- System Includes
System Includes
- (4) QSC AD-C4T AcousticDesign™ 4.5" Ceiling Mount Speakers
- (1) JBL VMA160 60W 5-Channel Bluetooth Enabled Mixer Amplifier
- (1) JBL CSR-V 1-Zone Wall Remote Control
- (250') West Penn 225 16/2 Non-Plenum Speaker Wire
- Reviews
Write Your Own Review