Fully integrated, highly cost effective, installed Sound Masking System solutions that meet the required noise reduction and masking of any small office space or commercial environment. Great for use in conference rooms, cubicle spaces, reception areas, and many others.

The Atlas Sound M1000 sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. The innovative 734 cubic inch square enclosure ensures ample low frequency response. A specially designed 8" dual cone loudspeaker is included in the package. A high efficiency 70.7V internal transformer is coupled to an external tap selector switch for easy system tuning.

The exclusive Atlas Sound EZ hang brackets simplify installation. This innovative suspension system utilizes (2) collapsible plated hangers configured to allow quick upward, downward, or side firing installation. The hangers are factory-installed on the unit and fold flat for shipping. To meet most any local code requirement, the M1000 includes an innovative cover containing both knockouts and a strain relief. This system will allow the use of rigid or flexible conduit (if required) and easily accommodates "through" connections on the removable plate. UL 2043 listed for use in air handling spaces.

Installation is made easy via the optional 78" (2m) suspension chain system, part MCHAIN72, that allows quick mounting and height adjustment of the M1000. An integral wire strain relief strategically located on the top of the enclosure allows for secure speaker cable termination.

The Atlas Sound AM1200 is a Low Profile Sound Masking System that features a compact enclosure utilizing two efficient wide range 2" x 4" speakers that are powered by an internal 12W amplifier. Its selectable white and pink analog sources are incorporated to allow maximum masking design flexibility and a variable high cut filter contours the masking noise to the appropriate environment. The AM1200 also features an external 12 Watt 70.7V amplifier output to drive other 70.7V speakers. Four mounting holes on the chassis make installation flexible as the AM1200 can be mounted to the wall or ceiling, or if you need a single suspension point, two removable hanger brackets are included.

Atlas Sound M1000 Sound Masking Speaker:

• 70.7V POWER TAPS: .25, .5, 1, 2 and 4
• Pre-Assembled Unit Includes 8" dia. Loudspeaker, Transformer, Enclosure, Baffle and Mounting Hardware
• Labor-Saving Hardware Package – Complete with New Snap Hanger Assembly, Allows Quick and Easy Installation
• Innovative Input Panel Includes Combination Knock-Out and Strain Relief Connector to Accommodate Flexible or Rigid Conduit
• Design Enables Upward, Downward, or Horizontal Orientation
• 734 in³ Enclosure for Extended Low Frequency Response
• Available in Black or White Epoxy Finishes to Blend with a Variety of Open Ceiling Plans
• Suitable for Use Above Suspended Ceiling Systems or Open Ceiling Spaces Approved for Use in Air Handling (Plenum Ceilings)
• Safety Listed to UL 1480 & UL 2043
  
  

Atlas Sound AM1200 Sound Masking System:

• Self-Contained Audio Masking System
• Includes Two Efficient Wide Range 2" x 4" Speakers
• Internal 12W Class D Amplifier
• Selectable White and Pink Noise Analog Generators
• External UL Rated 24VDC Power Supply
• UL2043 Listed "Suitable for Use in Air-Handling Spaces"
• UL60065 Listed

M1000 Data Sheet

M1000 Install Sheet

Sound Masking Data Sheet

AM1200 Data Sheet

• (10) Atlas Sound M1000 Sound Masking Speakers
• (1) Atlas Sound AM1200 Sound Masking Generator
• (11) Atlas Sound MCHAIN72 72" Hanging Chains