Dental Office Patient Privacy and Sound Masking System by Cambridge

This dental office speech privacy system is a sound masking solution designed to protect confidential conversations in all types of dentist or orthodontist office layouts, waiting rooms, reception areas, and exam rooms. Reduce office noise and increase patient privacy with this cost effective, easy to install sound masking system.

Availability: In Stock and Ready to Ship!



Dentist Patient Privacy and Sound Masking System

This speech privacy system is a commercial office sound masking solution designed to protect patients confidential conversations in all types of dentist offices, waiting rooms, reception areas, patient rooms, semi-private bays and open floor exam rooms. Reduce office noise while meeting required HCAHPS scores and HIPAA compliance. Privacy should be an important part of the entire patient experience, otherwise, they may feel uncomfortable, embarrassed, and less likely to have open conversations with the dentist or staff. This speech privacy system will help achieve patient privacy in dentist offices and exam rooms as well as provide office noise cancellation, by making human speech less intelligible.

An All-in-One Solution for Speech Privacy

This Qt Patient Privacy System consists of a control module, two lighted privacy signs, and 12 direct-field sound masking emitters. The intuitive control module can be installed in a reception desk, in the hallway, or mounted to any wall. Once turned on, the emitters installed in the ceiling add a low level of background sound into the space that will make human speech less intelligible. Lighted privacy signs turn on to indicate the system is running, and let patients know that their conversations are being protected.

Easy to Retrofit into Existing Spaces

The Qt Patient Privacy System can be installed quickly and inexpensively in any type of office through Cambridge Sound Management's nationwide network of certified sound masking professionals. Privacy signs can be surface mounted, glass mounted, or mounted into a gang box, easily blending in with modern medical office décor.

Mounting Options

The control module can be surface mounted directly to the wall, flush mounted with the supplied box, or flush mounted to a suitable 4-gang electrical box (or 3-gang using EU/UK hardware). The privacy signs can be mounted on glass using the hider plate, surface mounted with self-adhesive tape, or mounted using a 1-gang box (North America NEMA or EU/UK types).

* The entire system is GreenSpec listed, consuming less than 7 watts of power. The system can help enable LEED v4 certification in the categories of acoustics and daylight harvesting.



  • Control module and privacy signs provide clear indication that the system is activated and privacy is being protected
  • Premium, minimalist design style seamlessly fits in with modern healthcare design aesthetics
  • Out-of-the-box support for spaces up to 800 square feet
  • Option to add additional emitters for larger areas
  • Energy efficient and consumes less than 7 watts of power
  • Patented direct-field sound masking provides uniform masking coverage
Control Processor/Privacy Signage
Sound Masking Frequency Response 1200 Hz to 6,300 Hz
Music / Paging Frequency Response 1200 Hz to 10,000 Hz
Masking Min - Max SPL 1, 30 dBA to 60 dBA @ 1 meter distance
Music / Paging Max SPL 1 62 dBA @ 1 meter distance
User Adjustable Equalization None - Internally Fixed Masking Spectrum
Non Correlated Masking Sources 4 Masking Sources
Number of Masking Zones 1 Zone - (2 Cable Runs per Zone)
Number of Audio Inputs 1 Audio Input - (Stereo or Mono)
Audio Input Level +4 dBu (2 Volts RMS Max)
Audio Input Impedance 5000 Ω
Audio Input Connector Captive Screw Terminal (Balanced / Unbalanced)
Remote Control Function Quantity 1 - Contact Closure Input (Normally Open) / Qty 1 - 5Vdc Logic Status Output
Remote Control Connector Captive Screw Terminals
Minimum Output Impedance 2 Ω per channel
Power Input Captive Screw Terminal & Coax Power Plug (center pin positive)
Privacy Sign Connections Controller Qty 2 - Captive Screw Terminals - 5Vdc output @ 75ma
Privacy Sign Connections Sign Qty 1 - Spring Loaded Push Terminals - 5 Vdc input @ 75ma
Output Connections RJ45 x Quantity 2 (8 Conductor)
Masking Level Adjustment Four Front Panel Buttons w/ LCD Display - 0.5 dB steps
Masking Ramp Times 0 to 120 Seconds - up and down ramp times are independent (Front Panel / Remote Control)
Audio Input Level Adjustment Four Front Panel Buttons w/ LCD Display - 1 dB steps
Setup Menu Access Four Front Panel Buttons w/ LCD Display
Emitter / Device Capacity 60 Qt Emitters per Run - 120 Qt Emitters Total
Maximum Emitter Cabling Distance 1000ft (300 meters) per cable run
Maximum Power Consumption 7 Watts @ 24 VDC
Power Supply Operating Voltage Input: 100 - 240 VAC @ .6 Amp
Output: 24 VDC @ 1.0 Amp
Included Control Processor Accessories Power Supply / ACT Hole Saw / Box Adapter Plate (4-Gang US - 3- Gang UK/EU) / ST-1000 Back Box
Included Privacy Sign Accessories Qty 2 - Single Gang Electrical Enclosure Backing Plate / Qty 2 - Glass Finishing Plate with Adhesive Strips
Firmware Update Yes - Integrated USB Connector
Controller Mounting Wall Mount - (Back plate included) / Electrical Box (US/UK/EU Adapter Included) / Supplied Backbox
Privacy Sign Mounting Single Gang Electrical Enclosure (North American Nema or EU/UK types) / Self Adhesive Strips
Control Processor Color White
Privacy Sign Color White w/ Blue LED
Certifications FCC Part 15 RoHS Compliant CE US STD 60065 CAN/CSA STC C22 2 60065 ETL Listed Green Spec Listed
Operating Temperature Range 40°F to 90°F (4°C to 32°C)
Privacy Sign Dimensions (H x W x D) 0.19" (4.8 mm) x 3.5" (90 mm) x 4.5" (113 mm)
Controller Dimensions (H x W x D) 0.875" (23 mm) 7.0" (179 mm) x 3.5" (89 mm)
Controller & Privacy Sign Weight 0.8 lbs (0.35 kg)
Sound Masking Frequency Response 200 Hz - 10,000 Hz
Music / Paging Frequency Response 200 Hz - 10,000 Hz (-10 dB)
Masking Min - Max SPL 30 dBA - 60 dBA @ 1 meter distance
Music / Paging Max SPL 62 dBA @ 1 meter distance
Nominal Impedance 3600 Ω
Nominal Dispersion 170 degrees conical / half space
Connections Input / Output - RJ45 Modular Jack
Channel Selection Four Channel Auto Sequencing and Repeating
Selectable Attenuation 0 dB, -3 dB, -6 dB, -9 dB
Cabling Category UTP Cabling (8 conductor)
Included Accessories Acoustic Ceiling Tile Mounting Ring - UTP Cable (16ft/30ft)
Loudspeaker Type Passive w/ Transformer
Maximum Power Consumption .02 Watts
Enclosure Sealed
Color White (Optional Black Caps and Accessories)
Certifications UL 2043
Cabling Qty 1 - 50ft Emitter Cable / Qty 7 -16ft Emitter Cables / Qty 2 - 50ft Privacy Sign Cables - Included in Kit
Emitter Cabling Type CMP (Plenum) UTP Twisted Category 3 Cable
Privacy Sign Cabling Type CMP (Plenum) 20AWG 2 Conductor Cable
Driver Dimensions (Dia) 1.25" (32 mm)
Emitter Dimensions (H x W x D) 2.5" (64 mm) x 3.25" (83 mm)
Emitter Weight 0.72 lbs (0.329 kg)


System Includes

System Includes

  • (1) QT-HCE Patient Privacy System:
    • (8) Qt Emitters
    • (1) Wall-Mounted ST 1000 Control Module
    • (1) 4-Gang Adaptor Plate for Control Module
    • (2) Automatically Lighted Privacy Signs
    • (2) 1-Gang Adaptor Plates for Privacy Signs
    • (2) 50 ft (15.2 m) Plenum-Rated Cables for Privacy Signs
    • (1) Power Supply
    • (1) 50 ft (15.2 m) Homerun Audio Cable
    • (7) 16 ft (4.8 m) Audio Cables
    • (1) Hole Saw
  • Plus Additional Qt Emitter 4-Pack (E-A-W-16-4):
    • (4) Qt® Emitters
    • (4) 16 ft (4.8 m) Audio Cables

Be the first to review this product

Write Your Own Review

You're reviewing: Dental Office Patient Privacy and Sound Masking System by Cambridge