JBL VMA160 60W 5-Channel Bluetooth Enabled Mixer Amplifier

The JBL VMA160 is a cost-effective 5-channel input Bluetooth-enable mixer/amplifier with low impedance functionality (4Ω, 8Ω) and high impedance 60W @ 70V and 100V output. They are designed with convenient and flexible features to be used by commercial integrators worldwide, particularly price-sensitive emerging markets and include multi-source mixing, VOX function and priority muting.

Voice activated ducking is available on input channel 2. The audio input level required to activate ducking is set using the trim pot on the rear panel. Adjusting in the counterclockwise direction will reduce that level while the full clockwise setting will disable the VOX function.

The VMA160 may use input channel 2 as a priority channel, muting all other channels when pins 4 and 5 are shorted using a switch closure. Similarly, input 5 can exercise priority over all inputs into output amplifier CH2. Input 2 will have priority over both amplifiers CH1 and CH2 if the routing DIP switch #2 is set to ON.

Remote volume control can be implemented using a CSR-V controller connected via an Ethernet cable to the RJ45 connector on the back panel.

• 5 inputs with 1 output of 60W of power
• Independent bass and treble controls for each output channel
• 100V and 70V output, or 4Ω/8Ω
• Paging Chime, and Priority muting
• Works with JBL CSR-V wall controllers
• Balanced mic/line inputs; RCA (.775V) inputs
• Rack mounting hardware included

Manual