- Description
Details
The VT4881ADP Powered Compact Arrayable 1-18" Subwoofer designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio, corporate A/V and theatrical presentations of all types. Ideal companion to VT4887ADP compact three-way systems.
The VT4881ADP is a lightweight, vented sub-woofer enclosure housing one Ultra-Long Excursion 18" woofer and a JBL DrivePack DP1 fully integrated power and DSP electronics package. The JBL DrivePack, developed in cooperation with Crown and dbx, brings leading-edge technology to the VERTEC DP Series including patented high efficiency Class-I power amplifier technology and onboard digital signal processing. This provides not only unmatched audio quality and performance but also onboard DSP functionality that communicates readiness and operational status to the user, and monitors fault detection of components and electronics.
A new Ultra Long Excursion 18" VLF component, fitted with dual voice coils, and Ultra Robust composite cone provides high output capabilities with an advantageous power-to-weight ratio. Enclosure features: foam-back perforated steel grille; speaker cone treated with weather-resistant compound; rigging tubes and hinge bars made from premium-grade alloy aluminum; plated hinge pins; stainless steel quick-release pin restraining lanyards; and inter-locking rubber feet which allow vertical stacking of multiple inter-locking units, including reverse ground-stacking for cardioid subwoofer array applications if desired. VT4881ADP rigging hardware (same as in the companion VT4887ADP compact fullrange system) relies on quick-release pins and end-mounted metal frames to couple adjacent units together in rigid but flexible arrays.- Features
Features
- New 2269G Advanced Technology Component
- Differential Drive® Neodymium Magnet
- Dual Voice Coil
- Direct Cooled™ cone transducer with Ultra-Long Excursion capabilities
- JBL DrivePack® technology delivers superb audio quality and robust high efficiency Class-I power
- World-wide AC line voltages are automatically selected for 50 or 60 Hz
- Advanced construction techniques using JBL PlyMax® provide exceptionally rigid, lightweight enclosure
- Rugged DuraFlex™ exterior finish; Weatherized loudspeaker cone
- Patented, integrated S.A.F.E™ suspension system: premium heat-treated alloys provide rigid, reliable hanging arrays designed for vertical orientation at various angles
- Specification
Frequency Response (-3 dB) 34 Hz - 125 Hz Frequency Range (-10 dB) 25 Hz - 160 Hz Maximum Peak Output1 131 dB SPL, 1m Low Frequency One 2269G, 457 mm (18 in) dia., 100 mm (4 in) Dual Coil Nominal Impedance 4 Ohms Power Handling 2000W Continuous/8000W Peak (AES/2 hours)1200W Continuous/4800W Peak (100 hrs) Internal AmplificationOutput (at load) 3600W Peak, 1800W Continuous DP1 Output Topology 1-Channel Class-I Signal Processing dbx Type IV Conversion System, Precision bandpass filters, limiting, pre-equalization filters System Management DSP based limiters for mechanical and thermal protection Signal Input F-XLR Active 20K Ohms Balanced, 10K Ohms Unbalanced Signal Loop-Through M-XLR (passive pass-through) Controls Precision 0.5 dB increment Detented 16 dB input attenuator AC Power Operating Range Auto Select 90-132VAC/216-264VAC, 50/60Hz AC Line Voltage 50/60 Hz, Auto-Detect; 100V/220V, 120V/240V (±10%) AC Input Connector, AC Power Loop-thru Neutrik PowerCon AC Current Requirement 5A per system at 120V, 3.2A per system at 240V Box Construction Rectangular enclosure. PlyMax™ engineered wood composite structure Suspension System S.A.F.E. hardware, integral hinge bars nest in rigging tubes on box ends Grille Black perforated steel, Foam backed Dimensions (H x W x D) 22.4" (569 mm) x 31" (787 mm) x 31.5" (800 mm) Net Weight 62.2 kg (137 lbs) - Reviews
Write Your Own Review