- Description
Details
Audio-Technica's System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.
This system comes complete with a ATW-RC13 Rack-mount receiver chassis, two ATW-RU13 receiver units and two ATW-T1006 boundary microphones.- Features
Features
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis' System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loops
- Specification
Overall System Operating Frequencies 2.4 GHz ISM band Dynamic Range >109 dB (A-weighted), typical Total Harmonic Distortion <0.05% typical Operating Range 60 m (200') Open range environment with no interfering signals Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Frequency Response 20 Hz to 20 kHz Depending on microphone type Audio Sampling 24 bit / 48 kHz Latency 3.8 mS ATW-T1006 Boundary Mic RF Output Power 10 mW Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface) Frequency Response 20 - 20,000 Hz Low Frequency Roll-Off 80 Hz, 18 dB/octave Maximum Input Sound Level 139 dB SPL, 1 kHz at 1% T.H.D. Switches Touch-sensitive user switch function: toggle (mute on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: -6 dB, 0 dB, +6 dB Internal Battery 3.7 V rechargeable Li-ion battery Battery Life 9 hours Battery Charging Time 4 hours 30 minutes Accessory Included AC adapter (USB-type), USB cable Dimensions (H x W x D) 1.50" (38 mm) x 3.78" (96.1 mm) x 4.83" (122.8 mm) Net Weight (without batteries) 408 g (14.4 oz) ATW-RC13 Receiver Chassis Maximum Output Level XLR, balanced: 0 dBV 1 /4" (6.3 mm), unbalanced: +6 dBV Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external Remote receiver connector RJ45 Link Connector RJ12 Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet Dimensions (H x W x D) 1.73" (44 mm) x 8.26" (209.8 mm) x 6.67" (169.3 mm) Net Weight 33.2 oz (940 g) ATW-RU13 Receiver Unit Receiving System Diversity (frequency/time/space) Remote Receiver Connector RJ45 Mounting Thread Insert 1/4" x 20 Accessories Included Antennas, AT8690 RU13 holder Dimensions (H x W x D) 0.75" (19 mm) x 2.24" (57 mm) x 3.06" (77.6 mm) Net Weight 2.3 oz (64 g) - Documents
- In the Box
In the Box
- (2) ATW-T1006 Boundary Microphones
- (1) ATW-RC13 Rack-Mount Receiver
- (2) ATW-RU13 Receiver Units
- Reviews
Write Your Own Review