- Description
Details
The Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.
The BLX14/B98 includes BLX4 single-channel receiver, BLX1 bodypack transmitter, BETA 98H/C instrument microphone, power supply, 2 AA batteries, carrying case, and user guide.
The BLX4 Single Channel Receiver features simple setup, intuitive controls, and microprocessor-controlled internal antenna diversity. It includes 1/4" and XLR audio outputs and two-color audio status indicator LED. One-touch QuickScan frequency selection quickly locates the best open frequency in case of interference.
The durable BLX1 features a lightweight, ergonomic design and adjustable gain control. It comes equipped with power and battery status LED, 2 AA batteries that provide up to 14 hours of continuous use and has an operating range (line of sight) of 300 ft (91 m).
The BETA 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
- Features
Features
BLX14/B98 instrument wireless System:
- Easy set up and operation
- One-touch Quickscan frequency selection quickly locates the best open frequency
- Legendary Shure audio and durable construction
BLX4 Single Channel Receiver:
- XLR and ¼" output connectors
- Two-color audio status indicator LED
BETA 98H/C Instrument Microphone:
- Transformerless preamplifier circuitry which improves linearity across the full frequency range
- The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise
- Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments
- 10 ft (3 m) high-flex cable with attached preamplifier (XLR connection)
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
- Legendary Shure ruggedness and reliability
BLX1 Bodypack Transmitter:
- Quick and easy receiver frequency matching
- TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables
- Easily accessible On / Off switch
- Specification
System Working Range 300 ft (91 m) Line of Sight Audio Frequency Response 50 to 15,000 Hz Total Harmonic Distortion Ref. ±33 kHz deviation with 1 kHz tone 0.5%, typical Dynamic Range 100 dB, A-weighted, typical Operating Temperature -18°C (0°F) to 57°C (135°F) BLX4 Wireless Receiver Output Impedance XLR connector: 200 Ω, 6.35 mm (1/4”) connector: 50 Ω Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone XLR connector: –27 dBV (into 100 kΩ load) 6.35 mm (1/4”) connector: –13 dBV (into 100 kΩ RF Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Housing Molded ABS Power Requirements 12–15 V DC @ 160 mA (BLX88, 320 mA), supplied by external power supply (tip positive) Dimensions (H x W x D) 1.57" (40 mm) X 7.40" (188 mm) X 4.06" (103 mm) Weight 8.5 oz (241 g) BETA 98H/C Instrument Microphone Type Condenser (electret bias) Polar Pattern Unidirectional (cardioid) Frequency Response 20 to 20,000 Hz Output Impedance Rated at 150.0 ohms (actual) Recommended minimum load impedance: 1 kilohm Output Level (0 dB = 1 volt per Pascal) Open Circuit Voltage: -56 dB (1.6 mV) Output Clipping Level (at 1kHz, THD < 1%) 2.5 kilohm load: 11 dBV (3.5 V) 1.0 kilohm load: 3 dBV (1.4 V) Maximum SPL 2.5 kilohm load: 163 dB 1.0 kilohm load: 155 dB Dynamic Range (maximum SPL to A-weighted noise level) 132 dB (2.5 kilohm load) Signal-to-noise ratio 63 dB at 94 dB SPL (IEC 651) Recommended Operating Voltage 11 to 52 Vdc Phantom Operating temperatures -7 degrees C to 49 degrees C (20 degrees F to 120 degrees F) Storage temperatures 29 degrees C to +74 degrees C (-20 degrees F to 165 degrees F) Relative Humidity 0 to 95% BLX1 Bodypack Transmitter Audio Input Level Gain max: -16 dBV maximum; min (0 dB): +10 dBV maximum Gain Adjustment Range 26 dB Input Impedance 1 MΩ RF Transmitter Output 10 mW, typical Housing Molded ABS Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline Battery Life Up to 14 hours (alkaline) Dimensions (H x W x D) 4.33" (110 mm) x 2.52" (64 mm) x 0.83" (21 mm) Weight (without batteries) 2.6 oz (75 g) - Documents
- System Includes
System Includes
- (1) BLX4 Single Channel Wireless Receiver
- (1) BETA 98H/C Instrument Microphone
- (1) BLX1 Bodypack Transmitter
- (1) Padded, Zipper Carrying Case
- (1) PS23US Power Supply
- (2) AA Batteries
- Reviews
Write Your Own Review
System Components
-
Shure WB98H/C Clip-On Instrument Microphone
List $219.00Pro Acoustics Price $169.00Savings $50.00 (23%)