- Description
Details
The Ashly MX-406 Stereo Mic/Line Mixer is a rack-mountable six-input, stereo mic/line mixer designed to be used in fixed or portable installations. Each input will accept either microphone or line-level signals. If microphones are used, a -20dB pad switch is available. The microphone input has an ultra low-noise studio-grade mic preamp with up to 60dB of mic preamp gain. A three-position switch allowing you to set input gain for -20, -40 and -60dB is located on the front panel.
Each input has bass and treble shelving filters with individual control of each filter. An Aux Send on each input can be internally assigned pre or post level/EQ. Level and pan controls complete each input. Additional front panel controls include: Aux Master Out- put, Left/Right Stereo Output, On/Off Power switch and 3.5mm stereo line in jack on the front panel offers a conve- nient input alternative for MP3 players and smartphones. A Mono/Phones output control allows you to adjust the mono output and stereo headphone output. The Stereo headphone output jack is located on the front panel. Front panel LED indicators include channel clip, Phantom power, AC power and an 11-step LED output level meter. Connections on the rear panel include 1/4” TRS and XLR jacks for each input, and an XLR transformer balanced mono output.
The balanced stereo output jacks are 1/4” TRS. Channel inserts are 1/4” TRS. Left and Right Stereo Line Inputs (return) and Stereo Line Out use RCA jacks. A switch turns +48V Phantom Power on or off. Designed and built in the USA, the MX-406 has an all-steel chassis, contains high-quality components and has a five-year warranty.
- Features
Features
- High-gain mic preamps (60dB)
- Convenient, 3.5mm stereo line in jack on front panel for MP3 players and smartphones
- 2-band EQ on each input
- 6-channel inserts
- 20dB input pad switch
- +48V phantom power
- Universal power supply
- AUX send and return
- Stereo line in/out
- Input level and pan controls on each input
- Safety/Compliance: cTUVus, CE, FCC, RoHS
- Specification
Distortion THD at +4 dBu, 20Hz-20KHz <0.008% THD at +12dBu, 30Hz-10KHz <0.03% IMD (SMPTE) at +12dBu <0.03% HUM & NOISE (20Hz-20KHz at max preamp gain) Equivalent input hum & noise residual output noise TRS outputs: <-128dBu All levels at minimum residual output noise XLR output: <-110dBu All levels at minimum aux output, aux master <-98dBu All levels at minimum all ch. aux at nominal <-90dBu Maximum voltage gain (Master) 88 ±2dB—Mic/Line Input to Mono Output, 600ohm load
92 ±2dB—Line Input to Master Output, 600ohm loadMaximum voltage gain (Aux Sends) Mic Input to Aux Master Output, pre ch. level: 72dB Maximum voltage gain (Aux Sends) Mic Input to Aux Master Output, post ch. level: 92dB Stereo Line In to Master Output 28dB Frequency Response 20Hz-20KHz - +0.5/-1.0dB Equalization Bass: ±12dB at 70Hz, shelvingTreble: ±12dB at 8KHz, shelving Crosstalk Adjacent inputs, 20Hz-20KHz - <-65dB VU Meters Stereo outputs: -21 to +6 VU0VU = +4dBu Peak Indicators Peak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping Phantom Power +48 VDC appl to all Mic Inputs, Max. total current draw = 80mA. Max. single ch current draw = 14mA Power Requirements 120 VAC nominal, 93 VAC minimum, 50-60 Hz,20 watts (240 VAC available) Dimensions (H x W x D) 3.5" (88.9 mm) x 19" (482.6 mm) x 9.4" (239 mm) Shipping weight 14 lbs (7 kg) - Reviews
Write Your Own Review