- Description
Details
Peavey PVi 6500 400W 6-Channel Powered Mixer Amplifier with Bluetooth
The Peavey PVi 6500 uses exclusive and patented features like Mid Morph EQ to accurately help improve tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's 9 band graphic EQ combined with our patented and revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, which drastically enhances both the low and high end of the audio spectrum and is exclusively Peavey technology. Footswitchable built-in 24-bit digital effects compliment the already feature-packed unit by allowing the user to select multiple varieties of reverb and delay. Connect almost anything to this versatile mixer via the onboard 1/4", RCA and 1/8" mini jacks.
- Features
Features
- LS Feedback Locating System
- Master Mute for Channels 1-5
- Combination XLR and 1/4" input jack
- Footswitchable effects defeat and Master Mute
- Kosmos -C
- 9-Band Graphic EQ
- RCA, 1/8" Media input
- 400 watts of power for crystal clear audio reproduction
- Dual power section with independent control
- RCA Record outputs
- On-board 24 bit digital effects
- LED Meter bridge
- Mid-Morph
- Power amp sub-sonic filtering
- 15 Volt Phantom Power
- Bluetooth streaming audio
- Specification
Input Sensitivity Mic in to Full Power at the Power Amp Full-40 dBu; Nominal-22 dBu Line in to Full Power at the Power Amp Full-10 dBu; Nominal+8 dBu Channel EQ: Shelving EQ Low EQ 80 Hz ±15 dB; Low 250 Hz ±15 dB; High 4 kHz ±15 dB; High EQ 12 kHz ±15 dB CLIP LED Clip LEDs come on 3 dB before clipping Frequency Response Mic to Main 20 Hz – 20 kHz +0, -1 dB Line to Main 20 Hz – 30 kHz +0, -1 dB Mic to Amp 50 Hz – 20 kHz +0, -3 dB Line to Amp 40 Hz – 20 kHz +0, -3 dB Phantom Power +15 VOLTS Noise Main = Main line output, 22 – 22 kHz filter Amp 1 = Amplifier output, loaded at 4 Ohms, through AP All Controls Full Down Main <-95 dBu; Amp 1 <-70 dBu Master Volume Nominal Main <-88 dBu; Amp 1 <-67 dBu THD All Controls Nominal <0.01% @ main line output, -30 dBu in mic input Channel 1<0.5% @ amp 1 @ 100 Watts into 4 Ohms All Controls Nominal <0.005% @ main line output, +4 dBu in line input Channel 1<0.05% @ amp 1 @ 100 Watts into 4 Ohms Master EQ 63Hz ±12 dB; 125Hz ±12 dB; 250Hz ±12 dB; 500Hz ±12 dB; 1kHz ±12 dB Master EQ 2kHz ±12 dB; 4kHz ±12 dB; 8kHz ±12 dB; 12kHz ±12 dB Meter Array Limit -6 dB; -12 dB; -18 dB; -24 dB; -30 dB Amplifier Output Power Both Channels Loaded at 8 Ohms 60 Watts RMS per ch 120 Watts Peak per ch Both Channels Loaded at 4 Ohms 100 Watts RMS per ch 200 Watts Peak per ch Power Requirements Domestic 120VAC 50/60Hz 74 Watts Nominal Export 230VAC 50/60Hz 74 Watts Nominal Dimensions (H x W x D) 14" (355.6 mm) x 19.75" (501.6 mm) x 13" (330.2 mm) Weight Unpacked 20.02 lbs (9.08 kg) Weight Packed 22.29 lbs (10.11 kg) - Documents
Documents
- Reviews
Write Your Own Review