- Description
Details
The D800-Dante A-Net Distributor provides the link between the input module or console card and the Personal Mixer, providing power and a copy of the digital audio stream to your Aviom Personal Mixer, utilizing a standard Cat-5e cable.
The D800-Dante integrates additional advanced options for delivering high-channel-count audio streams to your Personal Mixer, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app.
The D800-Dante can be used with A-16II, A320, and A360 Personal Mixers in any combination.
Simple Setup. Powerful Performance.
On the most basic level, the D800-Dante does an unglamorous but important job: get power and audio to your Personal Mixer. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.
Get More Channels to Your Mixer
Used in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), the D800-Dante can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixer. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.
Connect Directly to Dante
If your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers.
Dante Sample Rates Up to 192kHz
With the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).
Grow Your System
If you need more than eight Personal Mixers, the D800-Dante includes an A-Net Out port on the rear panel – perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors.
Network Mix Back for Wireless In-Ears
If you're using A360 Personal Mixers, the D800-Dante eliminates the need for running analog cables from A360s to the transmitter units for the in-ear monitors.
Extend the Interface with iOS
The D800-Dante manages communication between the A360 Personal Mixer and supported iOS devices, allowing users to run the A360 Display™ app alongside their A360.
- Features
Features
- Direct connectivity to a Dante audio network
- Support for up to 64 Dante network channels
- Distributes power and audio to up to eight A-16II, A-16R, and A360 Personal Mixers
- One Pro16e A-Net In supports A-Net Bridge input from up to four synchronous Pro16 A-Net streams
- Network Mix Back for streamlined connections to wireless IEM transmitters
- Ethernet support for iOS devices over Wi-Fi
- One Pro16e A-Net Out for thru connections
- Heavy-duty locking connectors for all audio connections
- Direct connectivity to a Dante™ audio network
- Support for up to 32 Dante network channels
- Specification
Product Type A-Net Distributor Dante Primary I/O EtherCon RJ45 connector Dante Secondary I/O EtherCon RJ45 connector Stereo Link Four DIP Switch blocks; used to set up to 32 channel pairs as stereo links A-Net to/from Personal Mixers (Front Panel) Eight locking RJ45 connectors, powered; Compatible with A-16II, A320, and A360 Personal Mixers; 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II) A-Net In or A-Net Bridge In Accepts Pro16 or Pro16e A-Net; One locking RJ45 connector A-Net Out (Rear Panel) Pro16e A-Net; One locking RJ45 connector, unpowered A-Net Mixes Out Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal Mixers A-Net Cables Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections Ethernet One RJ45 connector LEDs Power On (red); Sync (green); Error (red); Sync (green); 1GB Active (red); Network Activity (green) USB Used for firmware updates Pro16e A-Net Support Transmits 16 channels of digital audio to A-16II and A-16R Personal Mixers Output Voltage for Personal Mixers 24VDC, 0.5 ampTransmitted over the Cat-5e cable Power Supply Internal, universal switching type, IEC connector Input Voltage 100-240VAC, 50-60Hz, 300W Fuse - 250VAC~ T4AL Dimensions (H x W x D) 3.5” (88.9 mm) x 19” (482.6 mm) x 14.25” (362 mm) Weight 12 lbs (5.44 kg) - Documents
Documents
- Reviews
Write Your Own Review