- Description
Details
Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown® represent affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.
Features include RCA and XLR inputs, user-selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.
With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!
- Features
Features
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs
- Efficient forced-air cooling prevents excessive thermal buildup
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
- Specification
Guaranteed Minimum Power 4 Ohm Stereo (per Channel) 300W 8 Ohm Stereo (per Channel) 200W 8 Ohm Bridge Mono 600W Performance Frequency Response (at 1 Watt) 20Hz - 20kHz, +0/-1dB Total Harmonic Distortion (THD) < 0.5%, 20 Hz - 20 kHz Intermodulation Distortion (IMD) =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB) Slew Rate >10V/us Voltage Gain 29dB Damping Factor (8 ohms), 10 Hz - 400 Hz > 200 Signal-to-Noise Ratio (below rated power, 20 Hz to 20 kHz, A-weighted)
> 100 dBCrosstalk (below rated power) At 1 kHz: –75 dB
At 20 kHz: –59 dBInput Sensitivity (for full rated power at 8 ohms) 0.775V or 1.4V Input Impedance (nominal) Balanced: 20 k ohms
Unbalanced: 10 k ohmsConnectors, Controls and Indicators Input Connectors One balanced XLR and one unbalanced RCA per channel Output Connectors (Speaker Connectors) 4-POLE Speakon® and one pair Binding Post per channel Front Panel Controls Power on/off switch, one gain control per channel Rear Panel Controls Output mode switch: stereo (dual), parallel or bridge
Input sensitivity switch: 0.775V or 1.4VPower Indicator One blue LED Signal Indicator One green LED per channel Clip (Peak) Indicator One yellow LED per channel Fault Indicator One red LED per channel Construction Protection Protection against short circuits, no-load, on/off muting, RF interference. Stable into reactive or mismatched loads Ventilation Flow-through ventilation from front to back Dimensions (H x W x D) 3.5" (89 mm) x 19" (482 mm) x 12.4" (315 mm) Net Weight 25.1 lbs (11.4 kg) Shipping Weight 29.5 lb (13.4 kg) - Documents
Documents
- Reviews
Write Your Own Review