- Description
Details
The Loudbox Performer is Fishman's most powerful acoustic amplifier, allowing you to be heard in any situation — solo or ensemble. The Loudbox Performer features 180 watts of transparent bi-amplified acoustic sound and two versatile input channels that accept both 1/4" and XLR sources for instruments and microphones. Each channel includes Fishman’s renowned 3-band EQ, feedback-fighting controls, and a new effects section for more tonal options than ever before.
The dedicated midrange control provides enhanced detail and note definition over conventional 2-way designs. An improved, integrated kickstand design allows the Loudbox Performer to be tilted back 50º for better sound projection at short range.
- Features
Features
- Two mic/instrument channels with 3-band EQ and feedback controls
- Bi-amplified with passive crossover for tweeter and midrange
- Long-throw acoustic suspension woofer for clean bass input gain control
- Auxiliary stereo input with level control and 1/4" and 1/8" connectors
- Dual digital effects section, with independent channel and effects level
- Reverb, Chorus, Flanger, Delay, Echo and Slap Echo effects
- Balanced XLR D.I. outputs on each channel and main mix
- Channel Mute to silence both input channels
- Headphone output
- Three-way speaker design with built-in 10° baffle angle
- Integrated, low profile kickstand for a tilt angle of 50º
- Foot Switch input for remote muting of input channels, or Chorus, Flanger, and Slap Echo effects
- Specification
Input Impedance 1/4" Input: 5MOhm
XLR Input: 2.4kOhm Balanced
Aux Input (stereo): 10kOhmPhantom Power XLR Input: 24VDC / 1.2kOhm DC source impedance per pin Tone Controls and Anti-Feedback Low: ±12.5dB @ 50Hz (resonant)
Mid: ±10.5dB @ 750Hz (resonant)
High: ±12.5dB @ 10kHz (shelving)
Anti Feedback range: -14dB @ 15Hz – 330Hz (Hi-Q resonant notch)Channel 1 & 2 D.I. Output Output Impedance: 440Ohm balanced
Phantom power tolerant, ground isolatedChannel 1 & 2 Effects Sends Output Impedance: 2.2kOhm
Operating Level: -10dBV NominalChannel 1 & 2 Effects Returns Input Impedance: 28k Ohm
Input Voltage: -10dBV NominalMix D.I. Output Output Impedance: 440Ohm balanced
Phantom power tolerant, ground isolatedSpeaker System Woofer 8" paper cone, acoustic suspension Midrange 5" poly cone, acoustic suspension Tweeter 1" cloth dome,neodymium magnet Tweeter Level Up to 6dB cut @ 10kHz Crossover Bi-amplified with active/passive hybrid crossover500Hz, active; 3.5kHz, passive Baffle Angle 10 Degrees Rated Power Cumulative 180Wrms Woofer Amp 120Wrms continuous Mid/Tweeter Amp 60Wrms continuous SPL @ 1 Meter 114dB SPL Frequency Response 80Hz – 20kHz (-4dB) Power Consumption 200W max Dimensions (H x W x D) 18.2" (462 mm) x 15.8" (401 mm) x 11.5" (292 mm) Weight 29.4 lbs (13.3 kg) - Documents
Documents
- Videos
Videos
- Reviews
Write Your Own Review