Bose PowerShare PS602P Adaptable Power Amplifier 2 x 300 Watts 4-8Ω 70/100V

Home /
Shop By Brand /
Bose /
Bose Commercial /
Bose Commercial Discontinued Products /
Bose PowerShare PS602P Adaptable Power Amplifier 2 x 300 Watts 4-8Ω 70/100V (Discontinued)

Description

Details

The PS602P is a 2-channel portable amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output. Onboard configurable loudspeaker processing eliminates the need for an additional signal processor in many installations, while outstanding audio performance and reliability are assured with patented technologies inherited from the field-proven PowerMatch® line. This unique set of features and technologies makes PowerShare one of the most versatile high-performance amplifiers available.

Applications:

Performing arts venues
Houses of worship
Conference centers
Retail stores
Restaurants and bars
Hospitality venues

Features

Features

PowerShare Technology - Patented PowerShare technology allows the total 600 watts of power to be shared asymmetrically across all outputs, as each output is capable of delivering full power. Instead of selecting amplifier power based on the needs of the largest zone, installers now have the freedom to use total amplifier power in the application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
Load-Independent Outputs - Each channel can be configured for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging, use of jumpers, or software settings.
DFL™ System - The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch® amplifier line, improves performance and reliability through continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion, while protecting loudspeakers.
Integrated Loudspeaker Processing with Optional PowerShare Editor Configuration - For applications requiring additional signal processing the PowerShare Editor Software offers real-time selection and control of Bose loudspeaker EQs, 9-band PEQs, mixing, crossover, limiters, delay, and mute/output polarity through a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker equalization and protection per output channel. These features eliminate the need for an external signal processor in many applications.
Auto-Standby - Designed to save power consumption when not in use. PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.

Specification

Power Rating
Amplifier Power	2 x 300W (THD+N < 0.04%, 1kHz, 4 - 8Ω, 70/100V)
Maximum Power Per Channel	600W @ 4 - 8Ω, 70/100V
Gain (Low-Z mode)	44dB, RCA (unbalanced) inputs; 32dB, Euroblock (balanced) inputs
Gain (70V mode)	47dB, RCA (unbalanced) inputs; 35dB, Euroblock (balanced) inputs
Gain (100V mode)	50dB, RCA (unbalanced) inputs; 38dB, Euroblock (balanced) inputs
Audio Performance
Frequency Response	4 - 8Ω: 20Hz – 20kHz (+/- 0.5dB @ 1W); 70/100V: Same as 4 - 8Ω with 50Hz high-pass filter
Channel Separation (Crosstalk)	> 85dB @ 1kHz, > 65dB @ 20kHz
Signal to Noise Ratio	100dB (at rated power, A-weighted)
Audio Inputs
Input Channels	2 unbalanced, 2 balanced
Connectors	Stereo RCA, XLR/TRS
Input Impedance	10kΩ (RCA), 20kΩ (XLR/TRS)
Maximum Input Level	20dBu (at 12dBu sensitivity setting)
Sensitivity	-10 / -2dBV, RCA inputs; 4 / 12dBu, Euroblock inputs (low / high sensitivity)
Audio Outputs
Outputs	2
Connectors	NL4 & binding posts
Integrated DSP
A/D and D/A Converters	24-bit / 48 kHz
Processing Functions	Matrix mixer, loudspeaker EQ, real-time 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity inversion
Loudspeaker Presets	Flat, DS16, DS40, DS100, FS3B, 402, 802, MA12EX, RMU105 and RMU108
Audio Latency	< 1 ms (any input to speaker output)
Indicators and Controls
Power LED	Solid green: Power is on Blinking green: Unit is in standby mode Solid amber: Thermal fault Solid red: Supply fault
Input Signal LED	Green: Signal present Amber: Input is near clipping Red: Input is clipping Solid red: Indicates a fault
Output Limit LED	Amber: Amplifier limiting an output Blinking red: Amplifier muted Solid red: Indicates a fault
Controls, Front Panel	Power On/Off, Output Level Control
Controls, Rear Panel	Amplifier mode DIP switches, loudspeaker EQ dials
Electrical
Mains Voltage	100 VAC – 240 VAC (±10%, 50/60Hz)
AC Power Consumption	120 VAC: 14W (Standby), 700W (Max) 230 VAC: 14W (Standby), 700W (Max)
Mains Connector	Standard IEC (C14)
Maximum Inrush Current	14.14 A (230 VAC / 50Hz), 8.04 A (120 VAC / 60Hz)
Protections	High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
Dimensions (H x W x D)	1.7" (44 mm) x 19" (483 mm) x 16.3" (414 mm)
Weight	12.2 lbs (5.5 kg)

Documents